0
To investigate absorbance versus time, you would typically measure the absorbance of a sample at regular time intervals using a spectrophotometer. This data can then be plotted on a graph to observe any changes or trends in absorbance over time, which can provide insights into the reaction kinetics or other time-dependent processes happening in the sample. It is important to ensure that the measurement conditions (wavelength, path length, temperature, etc.) remain constant throughout the experiment for accurate results.
What else can I help you with?
What other experiments would a spectophotometer would be useful?
A spectrophotometer would be useful in experiments involving determining the concentration of a solution by measuring its absorbance, studying the kinetics of enzyme reactions by monitoring changes in absorbance over time, and identifying unknown substances by comparing their absorbance spectra to known compounds.
What is the relationship between the optical density (OD) and absorbance in spectrophotometry?
In spectrophotometry, optical density (OD) and absorbance are directly related. As the OD increases, the absorbance also increases. This means that a higher OD value indicates a higher absorbance of light by the sample being measured.
Does the slope of a speed-versus-time graph represents acceleration?
No, the slope of a speed-versus-time graph represents the rate of change of speed, not acceleration. Acceleration is represented by the slope of a velocity-versus-time graph.
What is the difference between absorbance and transmittance?
Absorbance measures the amount of light absorbed by a sample, while transmittance measures the amount of light that passes through a sample. Absorbance is calculated as -log(T), where T is transmittance. Absorbance is commonly used in spectrophotometry to quantify the concentration of a substance in a solution.
Is optical density the same as absorbance?
Yes, optical density and absorbance are essentially the same concept, both referring to the measurement of how much light is absorbed by a substance.
Is there a simple equation to calculate the concentration given the absorbance and a time?
You need a graphic concentration versus absorbance.
How can you investigate absorbance versus time and not concentration versus time like you normally do for any kinetic investigation?
Too many words
How can the calibration curve of absorbance versus concentration be used to determine the concentration of a substance in a sample?
The calibration curve of absorbance versus concentration can be used to determine the concentration of a substance in a sample by measuring the absorbance of the sample and comparing it to the absorbance values on the calibration curve. By finding the corresponding concentration value on the curve, the concentration of the substance in the sample can be determined accurately.
Why is the absorbance versus concentration curve rarely straight?
The absorbance versus concentration curve is rarely straight because the relationship between absorbance and concentration is not always linear. Factors such as non-linear interactions between molecules, chemical reactions, and instrumental limitations can cause the curve to be curved instead of straight.
Why should a graph of absorbance versus concentration go through the origin?
A graph of absorbance versus concentration should pass through the origin because, according to Beer-Lambert Law, absorbance is directly proportional to concentration. When the concentration of a solution is zero, there are no absorbing species present, resulting in zero absorbance. This linear relationship indicates that as concentration increases, absorbance increases proportionally, reinforcing that the graph should start at the origin (0,0). Any deviation from this could indicate issues such as instrument calibration errors or scattering effects.
Is wavelength or absorbance the dependent variable?
"absorbance"Since in the experiment, you probably choose the wavelength, then measure the absorbance (absorption?, the absorbance is the dependent variable.
What is the purpose of the blank?
Blank Sample in Spectrophotometry is used to measure the absorbance of light without sample. It is subtracted from the total absorbance for measurement of Absorbance from a sample's absorbance.
What is difference between specific absorbance and absorbance interms of spectroscopy?
specific absorbance- it is absorbance in a solution containing one gm of substance in 100 ml solvent in 1cm shell. so it is having a difference with absorbance which is negative logarithm of incident light to the transmitted light. divya.chakraborty@gmail.com
What is the reason for taking absorbance on y-axis and time on x-axis?
Convention holds that time be on the horizontal axis.
What other experiments would a spectophotometer would be useful?
A spectrophotometer would be useful in experiments involving determining the concentration of a solution by measuring its absorbance, studying the kinetics of enzyme reactions by monitoring changes in absorbance over time, and identifying unknown substances by comparing their absorbance spectra to known compounds.
Is absorbance considered a discrete or continuous variable?
Absorbance is considered a continuous variable.
What is the different between primary absorbance and secondary absorbance in fluorescence?
in primary light absorbed by outer molecule while in secondary re-absorbance occurs
