A plane has to takeoff in the direction in which wind is blowing so that the airplane can get help when taking off at a speed of 160 knots. So for example you are going to California and the wind is blowing from Europe, you would have to takeoff from runway 13R if your at JFK and you would make a sharp left turn heading to the west into the wind and climb at an altitude of 36,000 feet and cruise at a speed of about 500 knots so you can get to California in about 6 hours and 20 minutes. I hope I answered your question.
i guess when the engines are set to full thrust, and when the plane leaves the ground...
The main force used in the takeoff of a plane is thrust generated by the engines. This thrust propels the plane forward and allows it to overcome drag, enabling the wings to generate lift for the plane to become airborne. Additional factors like lift from the wings and rotation of the aircraft also play a role in the takeoff process.
A jet plane needs a significant amount of kinetic energy for takeoff, which is generated by the engines providing thrust to overcome drag forces and lift the aircraft off the ground. Additionally, potential energy is required to lift the plane against gravity. The engines must work at full power during takeoff to generate enough speed and lift for the aircraft to become airborne.
After takeoff, airplanes continue to gain altitude while reducing engine power to reduce noise and fuel consumption. This reduction in engine power may give the sensation of slowing down, even though the plane is actually climbing and increasing its speed. Additionally, as the plane ascends, it moves further away from the observer on the ground, which can create the illusion of decreased speed.
As the jet plane rapidly accelerates on the runway, the engines produce thrust that propels the plane forward. The forward motion creates lift on the wings, allowing the plane to become airborne once a certain speed is reached and the lift overcomes gravity. The acceleration continues until the plane reaches its desired takeoff speed.
A plane typically boards for about 30-45 minutes before takeoff.
Example from a pilot speaking inside a plane: This is American Airways 3953 we are ready for take off over.
Plane windows do not need to be open for takeoff. In fact, it is important for plane windows to remain closed during takeoff and landing for safety reasons. The cabin needs to be pressurized to ensure the comfort and well-being of passengers, and open windows would disrupt this pressurization.
i guess when the engines are set to full thrust, and when the plane leaves the ground...
a jet plane at a takeoff at 100 yards is 120 dB loud
it helps generally to take off into the wind because it gives the plane more lift
No, passengers cannot disembark from a plane once it has started its takeoff process.
Depends on the type, size of the plane. Takeoff speed for most small, single-engine aircraft is approximately 80mph, but this can be adjusted by the pilot for short takeoffs, wind conditions, etc.
Depends on the type of plane you are talking about.
Yes, a B777 plane sounds EXACTLY like a racing car during takeoff!!
Weirdly, yes it is. When it gets to 190 and the plane is at 200, a Bugatti Veyron can accelerate past the speed of the plane.
When a plane is taking off it should go at a speed at 160 knots before reaching into the air..