The middle of a Bunsen flame can reach temperatures of up to 1300 °C (2372 °F) in the blue inner cone where complete combustion occurs.
in bunsen burner complete combustion takes place,it produces blue flame and blue region is the hottest part of a flame.so the whole flame is very hot,either the outermost part of flame.
The hole in the center of the Bunsen burner flame is caused by air being drawn into the flame and mixing with the gas, promoting efficient combustion. This produces a hot, blue inner flame that is ideal for heating purposes. The outer, cooler part of the flame is yellow due to incomplete combustion.
A Bunsen burner works by mixing gas with air in a controlled manner to create a hot, blue flame. The gas is released through a valve and mixes with air before being ignited by a spark to produce a hot flame. The amount of air and gas can be adjusted to control the temperature and type of flame produced.
The "air-hole" of a bunsen burner allows some of the flame to escape so that the heating flame does not become too hot. A flame that is too hot can damage laboratory equipment. When the air hole is closed it is a yellow sooty flame like the fires we have at home.
The inner blue flame on a Bunsen burner is silent because it has a well-balanced mixture of gas and air, causing complete combustion with minimal noise. The outer yellow flame is louder due to incomplete combustion and turbulence in the flame.
Blue and purple
70 degrees and the roaring flame is 100 degrees so yeah hot hot dont touch
A safety flame on a Bunsen burner is typically around 700°C (1292°F). It is characterized by a blue, well-defined inner cone with a faint outer flame.
A Bunsen burner is a common laboratory instrument that produces a hot blue flame. It is typically used for heating, sterilizing, and combustion reactions in a controlled manner.
The flame that comes out of the Bunsen burner. it's blue/pale violet.
As hot as yo mam in a oven with ya dad and a finger licking kfc bargin bucket full of diamond encrusted platapus and you are a flamingo man boris johnson will be king! BACON!
Robert Bunsen added an air hole to it so it could have oxygen as well as gas. when the air hole is open the flame you get is blue and is hotter than when the air hole is closed, which then gives a yellow flame.
In chemistry, a Bunsen burner is commonly used to generate a flame for heating, sterilizing, or reacting with chemicals. It produces a hot, blue flame by mixing gas (such as methane or natural gas) with air and igniting it.
The hottest part of a Bunsen flame is the blue inner cone.
Safety. The yellow flame is easier to see and burns much less hot.
The yellow flame (or luminous flame) should not be used because 1. It is less hot that the blue flame (or non-luminous flame) 2. It produces soot, as compared to the blue flame which is the clean flame
in bunsen burner complete combustion takes place,it produces blue flame and blue region is the hottest part of a flame.so the whole flame is very hot,either the outermost part of flame.