To convert kilowatts (kW) to British Thermal Units (BTU), you can use the conversion factor 1 kW = 3412 BTU/hr. Therefore, a 5 kW heater would produce 5 kW * 3412 BTU/hr = 17060 BTU per hour.
To convert from kilowatts (kW) to British Thermal Units (BTU) per hour, multiply by 3412. Therefore, a 5kW heater would produce 5 * 3412 = 17060 BTU per hour.
BTU is a measure of energy, while a kilowatt is a measure of power. Energy is power times time. Energy: measured in BTU or kilowatt-hours Power: measured in BTU/hour or kilowatts. 100,000 BTU equals about 29 kWh so a 1 kW heater produces about 3400 BTU per hour.
To calculate the cost per hour for a 400W heater, you need to know the electricity rate per kilowatt-hour (kWh) charged by your utility company. For example, if the rate is $0.12 per kWh, a 400W heater would use 0.4 kWh per hour (since 400W = 0.4 kW). Multiplying 0.4 kWh by $0.12 gives you a cost of $0.048 per hour to run the 400W heater.
To convert 5 kW to BTU/hr, multiply by 3412 (1 kW = 3412 BTU/hr). Therefore, a 5 kW heater will produce 17,060 BTUs (5 kW * 3412 BTU/hr) if operated for 1 hour.
To remove the same amount of heat as a light bulb in an hour (about 60 watts), approximately 200 ml of sweat would need to evaporate per hour. This calculation is based on the heat of vaporization of sweat and the rate of heat production by a light bulb.
To convert from kilowatts (kW) to British Thermal Units (BTU) per hour, multiply by 3412. Therefore, a 5kW heater would produce 5 * 3412 = 17060 BTU per hour.
A 10-kilowatt heater produces 34,120 BTUs per hour.
The time it takes to heat up a water heater can vary depending on the size and type of the heater. On average, it can take anywhere from 30 minutes to 1 hour for a water heater to heat up completely.
The time it takes for a water heater to heat up can vary depending on the type and size of the heater. On average, it can take anywhere from 30 minutes to 1 hour for a water heater to heat up a full tank of water.
BTU is a measure of energy, while a kilowatt is a measure of power. Energy is power times time. Energy: measured in BTU or kilowatt-hours Power: measured in BTU/hour or kilowatts. 100,000 BTU equals about 29 kWh so a 1 kW heater produces about 3400 BTU per hour.
Usually about an hour.
A water heater typically takes about 30 minutes to 1 hour to heat up and provide hot water, depending on the size and type of the heater.
A hot water heater typically takes about 30 minutes to 1 hour to heat up and provide hot water.
could be that your heater core is clogged or your thermostat is stuck in the open position making it slow to heat.
Propane has a heat content of 19,900 btu/lb net. This means that a 36000 btu/hr heater needs to burn 1.809 lbs of propane per hour to produce this amount of heat. A 40 lb bottle will last about 22 hours if the heater runs continuously.
A hot water heater typically takes about 30 minutes to 1 hour to heat up and provide hot water.
depends on the wattage of the elements along with the temp of the cold water but i would guess an hour or two