0
What else can I help you with?
How does the maximum value of the current depend on the frequency of the AC voltage source?
The maximum value of the current in an AC circuit depends on the frequency of the voltage source. As the frequency increases, the maximum current value also increases.
How is frequency and amplitude related?
Frequency and amplitude are two key characteristics of waves. In general, higher frequency waves have a shorter wavelength and carry more energy. Meanwhile, amplitude refers to the height of a wave and is not directly related to frequency.
What is the relationship between voltage and frequency in an electrical circuit?
In an electrical circuit, the relationship between voltage and frequency is that they are independent of each other. Voltage refers to the electrical potential difference between two points in a circuit, measured in volts. Frequency, on the other hand, refers to the number of cycles per second of an alternating current, measured in hertz. While voltage can affect the power of an electrical circuit, frequency determines the speed at which the current alternates direction.
What i s power frequency voltage?
Power: energy transferred per unit time.In electrical circuits, in the simplest case power is voltage x current (in AC circuit, you also need to multiply by a so-called "power factor", which is often close to 1).Frequency: the number of cycles per second.Voltage: energy required per unit charge, when moving a charge between two points. Thus, the voltage is always expressed (or at least implied) as a VOLTAGE DIFFERENCE between two points.
Why backing volt depends on the light frequency but not on the intensity?
Backing voltage in a photovoltaic cell depends on the light frequency because different frequencies of light correspond to different energy levels of photons, which can determine the voltage generated. However, intensity only affects the current generated by the cell, not the voltage. So, the higher the frequency of the light, the higher the backing voltage, regardless of the intensity.
What would be the 3 phase voltage on a frequency of 50 Hz?
Single phase and three phase voltages are not related to the frequency at which the voltage is generated. The frequency at which voltages are generated is governed by the speed of rotation of the generating device.
What is relation between frequency and voltage of that frequency?
voltage and frequency both are different quantity.. don't mix it...
What is the frequency in different countries?
Scroll down to related links and look at "AC voltage and frequencies in the world".
What is the difference between a voltage converter and a voltage inverter?
Converter is AC to DC. Inverter is DC to AC
Frequency depends on voltage or current?
Frequency doesn't depend on either voltage or current.
What is the effect of low frequency on the voltage?
The frequency would decrease the gain and increase the output voltage
What is the mains voltage and frequency used in the united kingdom?
The mains voltage is 230 volts, and the frequency is 50Hz.
What is the voltage and frequency used in US and why?
the voltage and frequency are 110v and 50(or)60hz because the devices which are invented in us are work at that voltage and it is efficient for that devices.
How can the frequency and voltage of an alternator be changed?
The frequency is changed by varying its speed, and the the voltage is changed by varying its field current.
What types of plugs are used in houses and what is the voltage and frequency of the household AC electrical service which is supplied?
Your AC electrical service's voltage and frequency, and the types of plugs and sockets you can use, depend on the place where you live in the world.If you want more detailed information please see the Related Link and some Related Questions shown below.
What is sweep voltage?
A: Sometimes a spectrum of frequency must be analyzed a voltage to frequency converter can be used to sweep a range of frequency just by changing some DC level.
How frequency is controlled in a grid?
The frequency is determined by the operational speed of the generators in the power plant and is very closely related to the RPM of the generators (it might only differ in a constant multiplier).Depending on the load of the grid a proper torque must be applied on the generators to generate voltage with the proper frequency. Once the AC is out in the grid its frequency is much less prone to environmental effects than its voltage.
