answersLogoWhite

0

both

User Avatar

Wiki User

14y ago

What else can I help you with?

Continue Learning about Physics

How can you fix a pinhole size leak on front of a radiator?

You can buy one of several products from your local auto parts store that will stop a small leak in the front of the radiator... Now If you are mechanically inclined you can also mark where the hole is at and then drain and remove the radiator.. Once you do this you can clean the area around the pinhole and use a soldering gun and some 60/40 solder to permanantly seal the hole...


How do you loosen stuck bolts without power tools?

You can apply a penetrating oil like WD-40 or PB Blaster and let it sit for a few hours to help lubricate and loosen the bolt. Heat the bolt with a propane torch to expand the metal, making it easier to turn. Using a breaker bar or a longer wrench for additional leverage can also help loosen a stuck bolt.


What is the total momentum of the bullet and the gun before firing?

The total momentum of the bullet and the gun before firing is zero, as the gun and the bullet are at rest. Momentum is the product of mass and velocity, and since both the gun and the bullet are not moving, their momentum is zero.


What information can be found in the stun gun microcoulombs chart?

The stun gun microcoulombs chart provides information on the amount of electrical charge delivered by the stun gun in microcoulombs. This can help users understand the strength and effectiveness of the stun gun in immobilizing a target.


Explain in terms of momentum conservation When a gun is fired the shooter describes the sensation of the gun kicking.?

When a gun is fired, the bullet propels forward with a certain momentum due to the force applied by the expanding gases in the gun barrel. According to the principle of momentum conservation, the gun must also experience an equal but opposite momentum in the backward direction. This backward momentum causes the sensation of "kick" felt by the shooter as the gun recoils.

Related Questions

Where does soldering gun came from?

From a soldering gun supply store


What is the difference of a soldering iron and a soldering gun?

A soldering iron is a straight tool, sort of like a long screwdriver. A soldering gun actually looks like a gun or a drill.


Where is a good place to purchase a soldering gun for home use?

There are many place to purchase a soldering gun for home use. The best place you can buy a soldering gun for home use is Office Depot. You can also find it online at Amazon.


How do you reattach the rear defrost cable on a 2004 ford expedition?

Try soldering it on with a soldering gun


What is the function of soldering gun?

Soldering guns are used where more heat is needed than from the lower-power soldering irons. They can be used for heavy electrical connections, stained glass assembly, and light sheet-metal work. Typical soldering guns are rated at 100 to 240 watts power. A gun may include a two-stage trigger to give two heat settings 📷


What is the meaning of soldering gun?

That is an electric soldering machine with a 'pistol' type grip, that switches on when you press the trigger.That is an electric soldering machine with a 'pistol' type grip.


What is a soldering gun used for?

Shooting solder at a special solder shooting range


How do you dismantle a shopping cart?

Well, take a screwdriver and a soldering gun and have a ton of fun!


Why is it not suitable to use a soldering gun to solder modem electronics component?

Solder guns as a rule have wider tips than soldering irons/soldering pens.You might not be able to reach just the spot that you want to with a solder gun given the size of the components, and how tightly packed they are on a modern circuit board. Many modern components, such as integrated circuits, will be damaged by the high heat levels produced by soldering guns.


What type of soldering is a soldering gun normally used for?

Soldering irons are usually used with rosin core solder. Sometimes it has lead in it but often not since its toxic. Most of the time its for heavy soldering like heavy gauge wires or older circuit boards since the tips are fairly big. They also have a decent temperature control so anything that is delicate like large SMD soldering.


Who needs the gun powder on time tangled in poptropica?

Go to the Viking age, and put the gunpowder in front of the cave. Go into the cave. You should get the Golden Vase REAL quick before the torch runs out. The torch also doesn't work in the water.


How do you put the wire back on to firewall solenoid for 1999 expedition?

Soldreing the wire to the solenoid will be the best long-term solution. Soldering guns are relatively cheap now at Harbor Freight. You can get a full kit (inclues soldering gun, flux, extra gun tips, and solder) for around $5.