0
500nm refers to a length of 500 nanometers, which is equal to 0.0000005 meters or 5 × 10^-7 meters. Nanometers are commonly used to measure wavelengths of light and dimensions in Nanotechnology.
What else can I help you with?
What happens blue light passes through a blue filter?
If blue light passes through a blue filter, the light will be transmitted through the filter because the filter is designed to allow blue light to pass through while absorbing other colors of light. The blue filter selectively transmits blue light and blocks other colors of light.
What is the frequency of light in fused quartz if the wavelength in vacuum is 500nm?
Divide the speed of light in a vacuum (in meters/second) by the wavelength (which you must convert to meters); that will give you the frequency in hertz. The frequency will be the same for different substances.
How much energy can be stored in a spring with a spring constant of 500Nm if its maximum possible stretch is 20cm?
The maximum potential energy stored in the spring can be calculated using the formula ( E = \frac{1}{2}kx^2 ), where ( k = 500 N/m ) is the spring constant and ( x = 0.2 m ) is the maximum stretch. Plugging in these values, the stored energy would be ( E = \frac{1}{2} \times 500 \times (0.2)^2 = 10 J ).
What color corresponds with 500nm?
Blue
In double slit interference for a wavelength of 500nm the path length difference between the two waves for the second constructive interference fringe is?
For constructive interference in a double slit setup, the path length difference between the two waves is equal to a whole number of wavelengths plus a half-wavelength. In this case, for the second constructive fringe (m=2), the path length difference is 1.5 times the wavelength: 1.5 x 500nm = 750nm.
How many waves of 500 nanometers would it take to equal 1 cm?
A 500nm wave has a wave length of 500nm. The nano- prefix means × 10^-9 → 500 nm = 500 × 10^-9 m The centi- prefix means × 10^-2 → 1 cm = 1×10^-2 m → 1 cm ÷ 500 nm = (1×10^-2 m) ÷ (500×10^-9 m) = (1/500) × 10^(-2 - -9) = 0.002 × 10^7 = 2 × 10^4 = 20,000 waves.
Calculate the limit of resolution for the oil lens of your microscope Assume an average wavelength of 500nm?
Resolving power = 0.5x wavelength/ numerical aperture (n sin theta)n sin theta in most microscope have value = 1.2 and 1.4therefore:R. P. = 0.5x500nm/ 1.25 = 200nm = 0.2 microns.(conv. 1000nm = 1micron).
What is the size of a lysosome?
They vary in size between 0.1 - 1.2 micrometres.
What happens blue light passes through a blue filter?
If blue light passes through a blue filter, the light will be transmitted through the filter because the filter is designed to allow blue light to pass through while absorbing other colors of light. The blue filter selectively transmits blue light and blocks other colors of light.
What is the frequency of light in fused quartz if the wavelength in vacuum is 500nm?
Divide the speed of light in a vacuum (in meters/second) by the wavelength (which you must convert to meters); that will give you the frequency in hertz. The frequency will be the same for different substances.
What wavelenght of light make the leaves green?
Chlorophyll is a green pigment found in most plants, algae, and cyanobacteria. Its name is derived from the Greek chloros "green"andphyllon "leaf". Chlorophyll absorbs light most strongly in the blue and red but poorly in the green portions of the electromagnetic spectrum, hence the green color of chlorophyll-containing tissues such as plant leaves.Green on the visible light spectrum exists between the wavelengths of 500nm and 550nm
How much energy can be stored in a spring with a spring constant of 500Nm if its maximum possible stretch is 20cm?
The maximum potential energy stored in the spring can be calculated using the formula ( E = \frac{1}{2}kx^2 ), where ( k = 500 N/m ) is the spring constant and ( x = 0.2 m ) is the maximum stretch. Plugging in these values, the stored energy would be ( E = \frac{1}{2} \times 500 \times (0.2)^2 = 10 J ).
Does 300nanometers have a lower frequency than 500nanometers?
300nm is the "wavelength". Wavelength and frequency are related by the following equation: λ = v / f Where λ (gamma) is the wavelength, v is the speed of the wave (typically c, the speed of light (3×10^8 m/s)), and f is the frequency. So f = v / λ. So a 300nm wave, (λ = 300*10^-9 m) has a frequency of (3e8 / 300e-9) = 1e15Hz or 1,000THz. 500nm: (3e8 / 500e-9) = 6e14Hz or 600THz. See link.
Calculate the energy of 2.00mol of photons for 500nm?
The energy of a photon can be calculated using the equation E = hc/λ, where h is Planck's constant (6.626 x 10^-34 J.s), c is the speed of light (3.0 x 10^8 m/s), and λ is the wavelength in meters. Converting 500nm to meters (1nm = 1 x 10^-9 m) gives 5 x 10^-7 m. Plugging these values into the equation gives E = (6.626 x 10^-34 J.s * 3.0 x 10^8 m/s) / 5 x 10^-7 m = 3.9768 x 10^-19 J. Since there are 2.00 mol of photons, the total energy would be 2.00 mol * 6.022 x 10^23 photons/mol * 3.9768 x 10^-19 J/photon = 4.78 x 10^6 J.
What is the difference between sound and visible light in their wave lenght?
The question makes little sense, but sound is a longitudinal wave, light is a transverse wave. Light avergaes around 500nm wavelength, sound audible to the human ear ranges from a few cm to 20m or so.
