An electrical insulator that can be polarized by an external electric field.
For an insulating material, the dielectric strength should be high to withstand high voltages without breaking down. Conversely, the dielectric loss should be low to minimize energy loss due to internal friction within the material when subjected to an electric field.
The dielectric breakdown strength is the maximum electric field that a dielectric material can withstand before it breaks down and allows electrical current to flow through it. It is a measure of the insulation properties of the material.
The dielectric constant of mineral spirits can vary depending on the specific composition and purity of the substance. Generally, the dielectric constant of mineral spirits ranges from around 2 to 3.
The dielectric constant of crude oil varies depending on the specific composition of the oil. However, in general, the dielectric constant of crude oil ranges from around 2.0 to 3.5.
No, a dielectric and a conductor are two different types of materials. A dielectric is an insulating material that can store and transmit electric energy, while a conductor is a material that allows electricity to pass through it easily.
A 'dielectric' describes a material that supports an electric field and is generally used to describe an insulating material. Two properties exhibited by a dielectric are its permittivity and its dielectric strength. High values of permittivity (abillity to improve capacitance) are desirable for dielectrics used in capacitors, and high values of dielectric strength (ability to withstand voltages) are desirable for insulators but, unfortunately, the two quantities aren't relatated. So, selecting a dielectric is a matter of compromise.
For an insulating material dielectric strength and dielectric loss should be respectively
why need dielectric test for transformer
The dielectric,usually the insulator between the plates of a capacitor, can be overstressed by the application of too high voltages applied to the capacitor plates. The dielectric breaks down and a current flows between the plates until,either they are discharged, or an equilibrium is reached,below the working voltage of the capacitor. If the dielectric is damaged in this process he capacitor must be replaced. Some dielectric material self heal and can recover from an over voltage.
dielectric constant for sodium Hypochlorite
Capacitors are named after their dielectrics. So, an 'air capacitor' uses air as its dielectric, a 'mica capacitor' uses mica as its dielectric, and so on. There are lots of different dielectric used to separate the plates of a capacitor, each with different permittivities and dielectric strengths. As the perfect dielectric (i.e. one with both a very high permittivity and a very high dielectric strength) doesn't occur, the choice of dielectric is always a compromise between it permittivity and dielectric strength.
A leaky dielectric is a poorly conducting liquid. Refer to "ELECTROHYDRODYNAMICS: The Taylor-Melcher Leaky Dielectric Model" for more information.
high and high
No, these are two unrelated properties of a material.
The dielectric breakdown strength is 3,000 volts per millimeter.
Yes. Once dielectric breakdown occurs the circuit is now completed through a conductive breakdown channel in the dielectric. The current injected in one end of the dielectric is matched by the current coming out of the other end.
E = Eo/k k is dielectric constant