The resistance can be calculated using Ohm's Law, which states that resistance (R) equals voltage (V) divided by current (I). In this case, R = 12V / 5A = 2.4 ohms.
Just use Ohm's Law: V=IR (voltage = current x resistance; using units: volts = amperes x ohms).
Divide Watts by Volts ; this gives you Amps.
V = (I) x (R) = 2 x 12 = 24 volts
That depends on what units you use as input. If you put in current in Amps and Resistance in Ohms you will get voltage in Volts.AnswerCurrent is measured in amperes. Resistance is measured in ohms, which is a special name given to a volt per ampere. Multiply amperes by (volts per ohm), and you are left with volts.
What you are asking is kinda like asking how many oranges in an apple.Voltage is the measure of electrical potential.Amperage is the measure of electrical flow quantity.A good illustration is a water pipe: you can have high pressure (volts) but unless the water is allowed to flow the quantity of water is zero. (amps)
voltage (volts) current (amps) resistance (ohms)
12 volts.
Current symbol I =voltage/resesistance I=V/R for direct current (dc) and for a resistive load in alternating current (ac)
The resistance of the circuit will be 46 ohms
Volts and amps are related according to Ohm's law where volts are equal to amps multiplied by resistance. Amps alone won't tell you how much voltage you have. 2.5 amps could have 1 volt or 200 volts it will depend on how much resistance the 2.5 amps sees.AnswerThere are no volts in amperes. They measure different quantities. Your question is like asking, "How many kilometres are there in 2.5 kilograms?" In other words, it is nonesense!
Ohm's Law: Resistance = voltage / current, so 12 / 3 = 4 ohms.
Power, in 'watts'.
Volts is the unit measurement for voltage Current is amperes or amps for short Resistance is ohms
Watts = current x volts, so you have to multiply Kw value by 1000 to get watts, then divide by the applied voltage. examples. 2Kw kettle (U.S) current = 2 x1000 divided by 120, or 16.7 amps 2Kw kettle (UK) current = 2 x1000 divided by 240 or 8.35 amps 100 watt car amplifier current = 100 divided by 12 volts = 8.5amps
Volts time amps equals watts so watts divided by volts equal amps.
To find the voltage required to send a current of 4 amps through a resistance of 60 ohms, you can use Ohm's Law: V = I x R where V is the voltage, I is the current, and R is the resistance. Plugging in the values: V = 4 amps x 60 ohms V = 240 volts So, you would need 240 volts to send 4 amps through a 60-ohm resistor.
No. Current is voltage divided by resistance.i.e. V=IR, which means I=V/R