0
What else can I help you with?
Do you use psi or lb?
psi = Pounds / sq. inch = unit of Pressure lb = Pounds = Unit of weight
How to convert 70 psi to kg cm2?
Use this formula: psi x 0.07031 = kg/cm270 psi x 0.07031 = about 4.921 kg/cm2
How do you convert .50mpa to psi?
To convert 0.50 MPa to psi, you can use the conversion factor: 1 MPa is approximately equal to 145.038 psi. Therefore, 0.50 MPa is approximately equal to 72.519 psi.
What is PSI from Earthbound?
PSI in Earthbound is a type of psychic power that characters in the game can use for various attacks and abilities. It stands for Psychic Points. Each character has their own unique set of PSI abilities they can use in battles.
Formula of conversion of psi to atmospheric?
To convert psi (pounds per square inch) to atm (atmospheres), you can use the conversion factor of 1 atm = 14.6959 psi. So, you would divide the psi value by 14.6959 to get the equivalent value in atmospheres.
Can you mix your clear coat with the paint and how much clear coat should i use?
Mixing clearcoat with paint, will ruin the paint.For enamel paints, make sure you use an enamel clearcoat. You should allow the paint to fully cure (at least a week) before attempting to apply the clearcoat. Never use a lacquer based clearcoat on an enamel based paint. It will ruin it.For lacquer based paint, you should only use a lacquer based clearcoat. The paint should be dry, but does not have to be fully cured, since the lacquer will wet the coat of paint below it anyway.
What colors does the 95 Ford Explorer come in?
For the 1995 Ford Explorer XLT : Brilliant blue clearcoat metallic Dark blue clearcoat metallic Deep emerald green clearcoat metallic Medium willow green clearcoat metallic Light willow green clearcoat metallic Charcoal grey clearcoat metallic Mocha frost clearcoat metallic Electric red clearcoat metallic Black clearcoat Oxford white clearcoat
What name brand of clearcoat would you use to paint over oilbase enamel?
If I wanted any clearcoat to make a paint shinier, I'd use a Krylon spray gloss varnish. Most oil based gloss paints are so hard and shiny they really don't need a clearcoat.
What can you use on your tarmac driveway to make it shiny and wet looking?
Automotive clearcoat.
What grit sandpaper do you use after clearcoat?
After applying clearcoat, it's recommended to use 1500 to 2000 grit sandpaper for wet sanding. This finer grit helps to smooth out any imperfections and achieve a glossy finish without damaging the clearcoat. Always ensure to wet the sandpaper and the surface to reduce friction and prevent scratching. Finish by polishing with a suitable compound to restore shine.
Do you sand between acrylic paint coats for cars?
no you do not sand when using acrylic, nor should you have to clearcoat.
What type of paint do you use to paint a bike?
I use the hardest paint I can find and almost always finish coat it with a really good clearcoat.
Psi 1995 Yukon?
The right fuel psi for your Yukon should be set at 14 psi. and you should see a different in it idling and response.
What should the psi be for a spare tire?
At least 30 psi.
Should you use an HPA tank on a tippmann a5?
Yes, just make sure to use a 4500 psi tank.
How do write psi in HTML code?
If you write Ψ or Ψ you should get it.
How much pressure should fuel pump have on 93 dodge Dakota?
39 psi +/- 5 psi39 psi +/- 5 psi
