0
What else can I help you with?
Why is a light bulb not on when a switch is not closed?
A closed switch completes the electrical circuit, allowing current to flow through the light bulb and generate light. If the switch is not closed, there is an open circuit, meaning the current cannot flow and the light bulb does not turn on.
Will the light bulb light up if you connect a wire to it?
No, a light bulb needs a closed circuit with a power source, such as a battery or electrical outlet, in order to light up. Simply connecting a wire to a light bulb without a power source will not allow it to light up.
Why does a light bulb light in a closed circuit?
A bulb does not light up if there is no voltage available across the bulb, or if the bulb is burned out.
How must the light bulb be connected in order for it to light up?
The light bulb must be connected in a closed circuit with a power source, such as a battery or electrical outlet, for it to light up. This means that the positive terminal of the power source must be connected to the positive terminal of the light bulb, and the negative terminal of the power source must be connected to the negative terminal of the light bulb. This allows the flow of electricity to power the light bulb and make it light up.
When the switch is closed how will the energy convert into light and heat by bulb compare with the energy converted into light and heat by bulb?
When the switch is closed, the electrical energy from the power source will flow through the circuit and into the light bulb. The bulb's filament will get hot due to the resistance, producing light and heat. The efficiency of energy conversion into light and heat by the bulb depends on the bulb's design and materials, as well as any losses due to inefficiencies in the circuit.
What will happen if the two switches connected to light up a single bulb are on?
It is dependant on whether the switches are in wired in a parallel or series configuration. If the switches are wires in parallel then both switches would have to be off to turn the light bulb off. Either switch could turn the light bulb on. If the switches are wired in series then both switches would have to be on to turn the light bulb on. Either switch could turn the light bulb off.
Is a light bulb a closed system?
The light bulb is a closed system: no mass transfer.
Do dimmer switches reduce bulb life?
Answer Actually dimmer switches extend the life of a light bulb, especially if you dim them often.
Why is the light bulb not a closed system?
it is a closed system. no matter or energy flows across the boundary
Why is a light bulb not on when a switch is not closed?
A closed switch completes the electrical circuit, allowing current to flow through the light bulb and generate light. If the switch is not closed, there is an open circuit, meaning the current cannot flow and the light bulb does not turn on.
A light bulb is hanging in the first floor of the room There are three switches in the ground floor room One of these switches belongs to that light bulb The light bulb is not lit and the switches?
Turn on one of the switches and leave it on for a few minutes. Then turn it off and turn on another switch. Proceed upstairs and touch the light bulb. The bulb that is warm corresponds to the switch you turned on first, and the bulb that is off and not warm corresponds to the switch you turned on second.
Will the light bulb light up if you connect a wire to it?
No, a light bulb needs a closed circuit with a power source, such as a battery or electrical outlet, in order to light up. Simply connecting a wire to a light bulb without a power source will not allow it to light up.
What bulbs glow when switch A is closed and switches B and C are open?
it's bulb 3
Based on what you have seen what must be true for a circuit to light a bulb?
There must be a current through the bulb in order for it to glow.
Can a bulb work as a switch?
First answer: No. Second answer: Yes. A light bulb is a resistance. Current flows across a tungsten filament, heating it to produce light. However, if there was some other resistance wired into a closed circuit, a screw type bulb could be used as a switch. You unscrew it to throw open the circuit, effectively turning off whatever else was wired in the line. Screw it back in to switch it on. So yes, you could use a light bulb as a switch. Some switches have LED (light emitting diodes) built into them so they light up when the switch is closed, and turn off when the switch is open. And some switches are wired just the opposite, so the LED is on when the switch is off. This makes these types of switches easier to find in the dark.
When the switch is closed which light bulb will light light bulb 1 2 or 3?
It depend on where the switch is located in the circuit.
Why does a light bulb light in a closed circuit?
A bulb does not light up if there is no voltage available across the bulb, or if the bulb is burned out.
