answersLogoWhite

0

When evacuating refrigerant from a chiller system, circulating water through the chiller helps dissipate the heat generated during the evacuation process. This prevents the chiller components from overheating and ensures efficient and safe evacuation of the refrigerant. It also helps maintain the chiller's operational efficiency.

User Avatar

AnswerBot

1y ago

What else can I help you with?

Continue Learning about Physics

What is the relation between ahu and chiller?

Ahu (air handling unit) and chiller are both components of a building's HVAC system. The AHU is responsible for circulating and conditioning air, while the chiller is responsible for cooling the water that circulates through the building to remove heat. The AHU uses the chilled water from the chiller to help control the temperature and humidity levels in the building.


How does an air cooled chiller work?

The air cooling of a chiller signifies , the cooling of radiator. in a chiller the compressor compressors the gas which on expansion cools in side Copper tubes causing the chilling effect. The refrigerants get heated up when compressed in a compressor. this heated refrigerant is cooled by blowing air in air cooled chillers. There are also water cooled chillers.


How did a 1920s refrigerator work?

A 1920s refrigerator typically operated using a compressor that circulated a refrigerant through a system of coils. The refrigerant absorbed heat from inside the refrigerator, cooling the interior space. The compressor then compressed the refrigerant, raising its temperature and releasing the absorbed heat outside the refrigerator.


What happens to the refrigerant in an evaporator?

In the evaporator, the refrigerant absorbs heat from the surrounding air or substance, causing it to evaporate and turn into a low-pressure gas. This phase change allows the refrigerant to cool down the air passing through the evaporator coils before it is circulated back into the space being cooled.


What happends inside a condenser?

Inside a condenser, vaporized or gaseous refrigerant is converted back into a liquid state through the process of condensation. This is achieved by transferring heat from the refrigerant to the surrounding environment, causing it to cool and change phase. The condensed liquid refrigerant can then be circulated back into the refrigeration or air conditioning system to continue the cooling cycle.

Related Questions

What is the relation between ahu and chiller?

Ahu (air handling unit) and chiller are both components of a building's HVAC system. The AHU is responsible for circulating and conditioning air, while the chiller is responsible for cooling the water that circulates through the building to remove heat. The AHU uses the chilled water from the chiller to help control the temperature and humidity levels in the building.


How does an air cooled chiller work?

The air cooling of a chiller signifies , the cooling of radiator. in a chiller the compressor compressors the gas which on expansion cools in side Copper tubes causing the chilling effect. The refrigerants get heated up when compressed in a compressor. this heated refrigerant is cooled by blowing air in air cooled chillers. There are also water cooled chillers.


What is the substance used in HVAC chiller systems to make it cold?

The substance commonly used in HVAC chiller systems to make it cold is a refrigerant. This refrigerant circulates through the system, absorbing heat from the surrounding air or water and transferring it outside of the building. Common refrigerants used include R-134a, R-410a, and R-22.


Major components of chiller unit?

The major components of a chiller unit include the compressor, condenser, evaporator, and expansion valve. The compressor is responsible for circulating the refrigerant through the system. The condenser releases heat from the refrigerant, causing it to condense into a liquid. The evaporator absorbs heat from the chilled water, causing the refrigerant to evaporate and cool the water. The expansion valve regulates the flow of refrigerant into the evaporator, controlling the cooling process.


How does a low pressure chiller work?

A low pressure chiller works by circulating a refrigerant at low pressure through a system that absorbs heat from a process or space. The refrigerant absorbs heat as it changes from a liquid to a gas in the evaporator coils, removing heat from the system. The gas is then compressed to increase its temperature and pressure before being condensed back into a liquid in the condenser coils, releasing the absorbed heat.


How does a centrilfugal chiller work?

A centrifugal chiller works by using a refrigerant to absorb heat from a building and then expel it outside. The process begins with the refrigerant being drawn into the evaporator, where it absorbs heat and evaporates into a gas. This gas is then compressed by a centrifugal compressor, increasing its pressure and temperature. Finally, the hot gas passes through the condenser, where it releases heat to the outside air and condenses back into a liquid, ready to start the cycle again.


How did a 1920s refrigerator work?

A 1920s refrigerator typically operated using a compressor that circulated a refrigerant through a system of coils. The refrigerant absorbed heat from inside the refrigerator, cooling the interior space. The compressor then compressed the refrigerant, raising its temperature and releasing the absorbed heat outside the refrigerator.


Where is the rupture disc located on a low pressure chiller picture?

The rupture disc on a low pressure chiller is typically located on the refrigerant circuit close to the compressor. It is designed to release pressure in the event of an overpressure situation to prevent damage to the system. The exact location can vary depending on the chiller's design and manufacturer.


What happens to the refrigerant in an evaporator?

In the evaporator, the refrigerant absorbs heat from the surrounding air or substance, causing it to evaporate and turn into a low-pressure gas. This phase change allows the refrigerant to cool down the air passing through the evaporator coils before it is circulated back into the space being cooled.


What happends inside a condenser?

Inside a condenser, vaporized or gaseous refrigerant is converted back into a liquid state through the process of condensation. This is achieved by transferring heat from the refrigerant to the surrounding environment, causing it to cool and change phase. The condensed liquid refrigerant can then be circulated back into the refrigeration or air conditioning system to continue the cooling cycle.


What does a flow switch do in a chiller?

A flow switch in a chiller detects if there is enough flow of cooling water through the system. If the flow drops below a certain threshold, it can trigger an alarm or shut down the chiller to prevent damage from overheating. The flow switch helps ensure that the chiller operates efficiently and safely.


How do you change high temperature refrigerant and high pressure refrigerant in to low temperature refrigerant and low pressure refrigerant?

You cool it and run it through a metering devise.