0
What else can I help you with?
Why should you always move the objective lens away from the slide when your focusing the microscope?
Moving the objective lens away from the slide when focusing prevents the lens from accidentally coming into contact with the slide and potentially damaging both the lens and the specimen. It also helps in preventing the lens from scratching the slide, ensuring clear and accurate observations.
Why should you watch from the slide before you lower the objective of your microscope?
Movements viewed through the microscope are exaggerated quite a bit. As such, it's best to attempt to line up the object on the slide by looking at the slide directly, rather than through the objective.
Which objective must be in position when you first set up a microscope?
I have always had the longest objective in position (pointing down), then lowered the lens to what I thought would be close to a good focus. This way, you can rotate the turret to the shorter lenses, and be assured that the lens body will not strike the stage or slide.
Why should you always move the objective lens away from the slide when you're focusing a microscope?
Moving the objective lens away from the slide prevents the lens from colliding with the slide, potentially damaging both. It also helps to prevent smashing any cover slip present on the slide, which can interfere with the quality of the image being viewed.
What power must be in place when you first find an image in the microscope?
You should first use the lowest power setting of a microscope to find an object and then center it within the viewing area. Then, when you switch to the next higher magnification, your target should still be close to the center and easier to find and focus on.
When viewing a specimen under the microscope you should always start with what?
When viewing a specimen under the microscope, you should always start with the lowest magnification objective lens. This allows you to locate and focus on the specimen before moving to higher magnifications for a closer look.
When viewing a specimen under the microscope you should always start with the?
low power objective lens to locate and focus on the specimen before moving to higher magnifications.
When focusing with a microscope do you always focus toward the specimen?
No, when using a microscope, you should focus away from the specimen initially by moving the objective lens upward, then slowly bring it down towards the specimen to avoid damaging the lens or the specimen.
What should you always remember when handling microscope slides?
Do not allow the high power objective to tough the lenses
Which objective should be in place both when beginning to use the microscope?
Scanning objective
A microscope should be stored with the objective in place?
Yes, it is recommended to store a microscope with the objective lens in place to prevent dust or debris from entering the lens threads and affecting the performance of the microscope. Additionally, storing the objective in place helps maintain the alignment and calibration of the microscope for accurate observations.
Why should you always begin to use a microscope with a lower power objective?
You should always begin using a microscope with a lower power objective to locate and focus on your specimen more easily. Low power objectives provide a wider field of view, making it simpler to find the area of interest. Additionally, starting with lower magnification minimizes the risk of crashing the objective lens into the slide, which can damage both the slide and the microscope. Once the specimen is in focus, you can then switch to a higher power objective for detailed observation.
When switching from the low-power objective to the high-power objective should you open or close the diaphragm Explain your answer?
When working with a microscope you should always take procauctions but one question I am asked a lot is When working with a microscope do you open or close the diaphram when working with the medium- and high-power objective nobs? The answer is you keep it open if you don't you won't be abler to see any thing.
Why should you look to the slide before you lower the objective of your microscope?
so the objective lens will not touch the slide.
Why should you always move the objective lens away from the slide when your focusing the microscope?
Moving the objective lens away from the slide when focusing prevents the lens from accidentally coming into contact with the slide and potentially damaging both the lens and the specimen. It also helps in preventing the lens from scratching the slide, ensuring clear and accurate observations.
When storing a microscope which objective lens should be pointed downward?
10x
What should objective lens should a microscope be stored in?
A microscope should be stored with the lowest-power objective lens in place to prevent damage to the higher-power lenses. It is recommended to keep the 4x or 10x objective lens in place for storage as they are less delicate than the higher magnification lenses.
