A 'yard' is a cubic measure of material 3 x 3 x 3 feet. Commonly used in landscaping and materials such as sands, soils and small stone delivery. A cubic yard is actually quite a lot of sand or soil - and would fill about 10-12 garden wheel barrows.
A 'yard' is also used as a common measurement of 'bucket' size of earthmovers and loaders.
ANS2
A yard is a volume measure used for soils and loose material. It is equal to 27 cubic feet. You can cover a 6 x 9 foot area 6 inches deep with a yard of material.
To calculate the volume of dirt needed to fill the area, you would need to know the depth of the area in yards. If the depth is 3 yards, then you would need 1800 yards of dirt (600 cubic yards ÷ 3 yards). If the depth is 1 yard, then you would need 600 yards of dirt.
Well you figger a dump truck hauls 12 yards... that's 33 truck loads.
577 yards.
There is about 2800lbs in 2 yards of top soil.
None because it's a hole but 6 cubic yards of dirt will fill it up.
The weight of dirt can vary depending on the type of dirt, but on average, 1 cubic yard of dirt weighs about 2,000 pounds. Therefore, 2.5 yards of dirt would weigh approximately 5,000 pounds or 2.5 tons.
To convert tons of dirt to cubic yards, you typically use an average weight factor for dirt, which is about 1.5 tons per cubic yard. Therefore, 350 tons of dirt would be approximately 233.33 cubic yards (350 tons ÷ 1.5 tons/cubic yard). Keep in mind that this can vary based on the type and moisture content of the dirt.
There may be very little or even none . Topsoil and "dirt" are different substances
14 cubic feet = 0.518 cubic yards
None. Just build the baseball field where the dirt is already there.
It doesn't hold any dirt. It's a hole.
6 x 2 x 1 = 12 cubic yards