0
A rotor meter, also known as a rotary flow meter, is a device used to measure the flow rate of liquids or gases in a pipeline. It operates by utilizing a rotating mechanism, typically a rotor or impeller, which turns in response to the flow of the fluid. The rotational speed is directly proportional to the flow rate, allowing for accurate measurement. Rotor meters are commonly used in various industries, including water treatment, chemical processing, and oil and gas applications.
What else can I help you with?
What wattmeter indicate for blocked rotor test?
There is one thing that watt-meter indicates of blocked rotor test. That is the voltage flows and in blocked rotor test.
Why 1987 BMW 520i spark reaching distributor but no spark at plug side Could it be a faulty air flow meter?
Could be bad dist. cap or rotor
You replaced plugs cap and rotor on a 1991 Blazer and still have a miss in 6 cylinder an suggestions?
have you tryed testing the ht leads? use an ohm meter or a multi-meter set to ohms, if it reads 1 on lead 6 its prbably broken :D
Why is the rotor disc of energy meter made thin?
Aluminium is a good conductor but it is non magnetic material and therefore cannot be altered by magnetic currents and run true and hence it is preferred.
Why will the rotor of a wound-rotor motor not turn if the rotor circuit is left open with no resistance connected to it?
Because there is no current flowing in the rotor, and thus there is no magnetic field in the rotor, and thus there is no torque between the rotor and the field.
What is a helicopter blade called?
the blade is called rotor bladesThe rotor blades on top are called Main Rotor Blades, because they are the main source of lift for the helicopter. The smaller rotor blades on the tail are called Tail Rotor Blades.
How do you measure the thickness of a rotor?
What is a rotor?
What type of rotor is found in a universal motor?
Wound rotor and squirrel-cage rotor
What is the rotor head for?
The rotor head changes the angle of incidence of the rotor blades as they rotate.
Why does a typical small helicopter with a single rotor have a second small rotor on its tail?
The small rotor on the tail, called the tail rotor, counteracts the torque produced by the main rotor of the helicopter. Without the tail rotor, the helicopter would spin uncontrollably in the opposite direction of the main rotor. The tail rotor helps maintain the helicopter's balance and heading.
How do you resurface a rotor?
The rotor will have to be removed from the car. It can be resurfaced by mounting it on a special machine that slowly removes metal from the rotor until the rotor is smooth.
What is difference of blocked rotor and locked rotor protection of motor?
What is difference of blocked rotor and locked rotor protection of motor?Read more:What_is_difference_of_blocked_rotor_and_locked_rotor_protection_of_motor
