Well, it depends from washer to washer, but normally, you first have to find it's fetish. Then, you use that knowledge to be able to turn it on. Doing this, you can easily reach at least third base.
To turn off the water to the washer, locate the water supply valves behind the washer and turn them clockwise until they are fully closed.
To change a faucet washer, first turn off the water supply to the faucet. Then, unscrew the handle and remove the old washer. Replace it with a new washer of the same size and type. Reassemble the faucet and turn the water supply back on to test for leaks.
To ensure proper operation of the washer, turn the water valve clockwise to open it and counterclockwise to close it.
Fill the washer fluid or repair the level sensor in the washer fluid bottle.
Fill washer resevoir - if it does not shut off possiby a bad sensor
It means the agitator, which is the large center piece in the washer, won't churn and turn inside.
To replace a bathroom faucet washer, first turn off the water supply to the faucet. Next, unscrew the faucet handle and remove the old washer. Replace it with a new washer of the same size and type. Reassemble the faucet handle and turn the water supply back on to test for leaks.
To replace a faucet washer, turn off the water supply, unscrew the faucet handle, remove the old washer, and replace it with a new one of the same size. Reassemble the faucet handle and turn the water supply back on to test for leaks.
This is just a guess. If only the hot or the cold stops and not both of them, it might be that the washer in the shut off valve has come off and is plugging the line. When you shut off the main and then open another faucet, the back pressure in the line pushes the washer out. If this is the case, the washer should still be in the shut off valve. Turn off the main and take the stem out of the faucet. The washer should be the valve.
To replace a washer in a faucet, first turn off the water supply. Remove the handle and unscrew the valve stem. Take out the old washer and replace it with a new one of the same size. Reassemble the faucet and turn the water back on to test for leaks.
Check for a broken/damaged wire on the sensor that is near the bottom of the washer tank.
To replace a faucet washer, first turn off the water supply. Remove the handle and unscrew the valve stem. Take out the old washer and replace it with a new one of the same size. Reassemble the faucet and turn the water supply back on to test for leaks.