0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How is 600mA different from 1500mA?
600mA is a lower current flow compared to 1500mA. This means that the device or circuit using 600mA will draw less current compared to one using 1500mA. The device using 1500mA will consume more power and drain the battery faster than the one using 600mA.
What does 10v 600ma mean?
10V 600mA means that the device requires a voltage of 10 volts and draws a current of 600 milliamps (or 0.6 amps) to operate properly. It is important to match the voltage and current requirements when selecting a power supply or charger for the device to avoid damaging it.
Can you use 12v 600ma instead of 12v 500ma?
Using a 12V 600mA power supply instead of a 12V 500mA one shouldn't be an issue if the device connected has a current rating under 600mA. However, it's important to ensure that the voltage matches and the device does not draw more current than the power supply can provide to prevent damage.
Can you use a 12v 1000mA on a device that requires 600mA?
yes this will work fine
Can you use a 9V 600mA adapter on a 9V 400ma scanner?
You can use any 9v adapter as long as the output amperage is rated higher than the amperage rating of your appliance so yes a 600ma adapter can be used to power a 500ma or 400ma appliance
Can you use a 9V 600MA to replace a 9V 1A?
Using a 9V 600mA power supply to replace a 9V 1A power supply may not provide enough current to power the device properly. It is important to match the voltage and exceed the current requirements of the device to avoid damage or malfunction.
Rave mp charger?
For Rave.MP ARC2.5/5.0 Model is HK41U-4.5-600 output 4.5 VDC, 600mA
Can you use a 9v 600Ma adaptor to power a 9v 300Ma appliance?
I think you mean to ask if one can use a 9v 600mA adapter to power a 9v 300mA appliance. Yes, you can do that. A 9v 600mA adapter will deliver 9v at up to 600mA. A mA is one milli amp, or one thousandth of an amp. 300mA is 300 thousandth of an amp, 300/1000 or 0.3 amps. 600mA is 600 thousandth of an amp, 600/1000 or 0.6 amps, and is twice the current of 300mA.
What would happen if you used a 600mA adaptor instead of a 500mA?
Using a 600mA adaptor instead of a 500mA one could potentially supply more current to the device than it is designed for. Depending on the device's circuitry, this can lead to overheating and damage, especially if the device is not designed to handle the extra current. It's generally safer to use an adaptor with the recommended current rating for the device.
What adapter has more power the 9v 600ma or the 9v 800ma?
The capacity of the 800 mA adapter is 200 mA larger than the 600 mA adapter.
Can a 6volt 600 milliamps adopter be substituted for a 6 volts 100 milliamps adopter?
Yes, you can substitute a 6V 600mA adapter for a 6V 100mA adapter. The important thing is to match the voltage (6V) while ensuring the new adapter can supply at least the same current (milliamps) as the original, to avoid damaging the device or causing underperformance. In this case, the 600mA adapter has a higher current capacity, which is safe to use with a device that previously used a 100mA adapter.
Can a 12v 550ma device be run by a 12v 210ma supply?
No, the supplies output is too small. To run a 550mA device a supply source of 600mA and larger would be needed.
