It condenses the spent working fluid from the turbine output back to a liquid before it is recycled back into the steam generators of the power plant. This increases operating efficiency. Usually the condenser operates by running the working fluid through a network of pipes inside a tower. Water mist is sprayed on the pipes to cool them and an updraft causes a vapor cloud to exit the top of the tower.
To produce electricity by the use of thermal energy in the form of heat.
Many major components of thermal power plants are designed for a service lifetime of about thirty to fifty years. The actual condenser lifetime will depend on a number of factors: quality of materials, impurities in the cooling water, whether the plant is run continuously, etc. From time to time, some of the tubes of the condenser may need to be replaced as one aspect of the periodic maintenance of the plant.
mechanical,electrical engineering
TDBFP return drain is going to condenser hense TDBFP position should be above condenser elevation. If it's below turbone then return drain flow may be restricted. Sachin
no
how to measure Temperature in thermal power plant
Gasoline can combusted and given out thermal energy but I suspect the questing ask about thermal energy plant. Thermal energy plant usually referred to Geothermal power plant or Solarthermal power plant. Geothermal plant run on the thermal energy from earth and Solarthermal run on the solar radiation transformed to heat. If the question ask for the latter then no, thermal energy plant doesn't run on gasoline.
Taketoyo Thermal Power Plant was created in 1966.
A good example of a thermal power plant is run that is coal fired.
The raw water reservoir in a thermal power plant is used to store large quantities of water that will be used for cooling purposes in the power plant's condenser. This water is typically drawn from a natural water source like a river or lake and needs to be stored in order to ensure a constant and reliable supply for the plant's operations.
A condenser is a device which condenses the steam at the exhaust of turbine. Condensers are classified in to two types.Such as (1) Jet condenser (2) Surface condenser It serves important functions. Such as 1. The condenser enables the recovery and recirculation of pure feed water into the plant. Thus, (i)The cost of water softening plant is reduced and (ii) It also saves the cost of fresh water to be supplied to the boiler.
A nuclear condenser is used to convert steam back into water in a nuclear power plant. This helps to increase the efficiency of the power plant by allowing the steam to be reused in the reactor's cooling process. Additionally, the condenser helps to reduce the environmental impact of the power plant by minimizing water consumption and preventing water pollution.