answersLogoWhite

0

🎒

Geometry

Geometry = Math of Euclid. Geometry is the Branch of math known for shapes (polygons), 3D figures, undefined terms, theorems, axioms, explanation of the universe, and pi.

176,573 Questions

How many lines can be drawn through 5 non collinear points?

Through any two distinct points, exactly one line can be drawn. For 5 non-collinear points, each pair of points can form a line. The number of ways to choose 2 points from 5 is given by the combination formula ( \binom{5}{2} ), which equals 10. Therefore, 10 lines can be drawn through 5 non-collinear points.

What are all attributes of a square?

A square is a quadrilateral with four equal sides and four right angles (90 degrees). It has two pairs of parallel sides and is a specific type of rectangle and rhombus. The diagonals of a square are equal in length, bisect each other at right angles, and each diagonal divides the square into two congruent triangles. Additionally, the area of a square can be calculated by squaring the length of one of its sides (Area = side²).

What is A quadrilateral that is neither a trapezoid nor a parallelogram?

A quadrilateral that is neither a trapezoid nor a parallelogram can be a general irregular quadrilateral, where none of the sides are parallel and the angles are not equal. Examples include a kite (which has two pairs of adjacent sides that are equal but does not have parallel sides) or an arbitrary four-sided shape with no specific properties. Such a shape does not conform to the definitions of trapezoids or parallelograms, which require specific relationships between the sides and angles.

What term is used when increasing the angle between 2 bones or straightening of the limb?

The term used for increasing the angle between two bones or straightening a limb is "extension." This movement occurs at various joints in the body, such as the elbow or knee, and typically involves straightening a flexed limb to return it to a more extended position.

Does star shaped have a hyphen?

The term "star-shaped" does have a hyphen when used as a compound adjective before a noun, such as in "star-shaped object." However, when used after a noun, the hyphen is typically omitted, as in "The object is star shaped."

What is the name of 41-50 sided polygon?

A polygon with 41 sides is called a "tetracontakaihenagon," while one with 50 sides is referred to as a "pentacontagon." These names derive from Greek numerical prefixes combined with the suffix "-gon," which means "angle" or "corner." Such polygons are often studied in geometry, though they are less commonly encountered in practical applications.

Why is there 2 scales on a protractor?

A protractor has two scales to measure angles in both degrees and radians. The outer scale typically measures angles from 0° to 180°, while the inner scale can also represent angles from 0° to 180°, but it allows for easier reading from both sides of the protractor. This dual functionality enables users to measure angles more conveniently, depending on their specific needs.

Can pentagon and square tessellate together?

No, a regular pentagon and a square cannot tessellate together. While squares can tessellate on their own, pentagons have angles that do not allow them to fit together with squares without leaving gaps. The internal angles of a regular pentagon are 108 degrees, while those of a square are 90 degrees, making it impossible to create a continuous tiling without overlaps or spaces.

Why is it important to learn how to use a compass and straightedge?

Learning to use a compass and straightedge is essential because it develops foundational skills in geometry and enhances spatial reasoning. These tools enable precise constructions and problem-solving without the reliance on technology, fostering a deeper understanding of mathematical principles. Additionally, mastering these techniques encourages logical thinking and creativity, which are valuable in various fields beyond mathematics. Lastly, it connects learners to historical practices in geometry, enriching their appreciation of mathematical history and culture.

What is formed when intersecting or connected lines in an enclosed space?

When intersecting or connected lines enclose a space, they form a geometric shape or polygon. The most basic examples include triangles, quadrilaterals, and other polygons, depending on the number of lines and their arrangement. The enclosed area is often referred to as the interior of the shape, which can have various properties such as area and perimeter.

Which blocks have intersecting sides?

Blocks that have intersecting sides are typically those that share a common edge or face. For example, in a three-dimensional space, two cubes placed next to each other can have one face in contact, thus intersecting along that face. Additionally, in more complex structures, blocks can intersect at various angles or orientations, creating shared edges or vertices. This concept is often explored in geometry and spatial reasoning.

How many KWH used to run an oven at 180 degrees C for 1 hour?

The energy consumption of an oven can vary based on its type and efficiency, but a typical electric oven uses about 2 to 5 kilowatts (kW) per hour. If we assume an average oven uses around 2.5 kW, running it at 180 degrees Celsius for one hour would consume approximately 2.5 kilowatt-hours (kWh) of electricity. Always refer to the specific oven's energy label for precise measurements.

How do you draw an angle of 55 degree with compass and pencil?

you will have to construct a 135 degree angle first...but constructing a 90 degree with a 45 degree to give u the 135 degree angle and then using that as a reference, u will have to draw a 60 degree angle going counter clockwise from the 135 degree angle so that 135-60=55 degree...hahah

I know it is confusing but if only i could show you...cz i mean visual is better than oral right !??! haha ^D^...

hope i can help....

What is axiolateral oblique?

Axiolateral oblique is a radiographic positioning technique used primarily in dental imaging to obtain clear views of the mandible and temporomandibular joint (TMJ). In this position, the patient's head is tilted away from the X-ray beam, and the film is placed perpendicular to the central ray, allowing for better visualization of the structures without superimposition. This technique is particularly effective in assessing the integrity of the mandible and surrounding anatomy.

How do i get surface area of a circular spa with a 12 foot diameter?

To calculate the surface area of a circular spa, you can use the formula for the area of a circle: ( A = \pi r^2 ), where ( r ) is the radius. For a spa with a 12-foot diameter, the radius would be 6 feet (half of the diameter). Plugging this into the formula gives you ( A = \pi (6)^2 \approx 113.1 ) square feet. Therefore, the surface area of the spa is approximately 113.1 square feet.

How can you be certain that the angles you have created form a square inside the circle?

To ensure the angles form a square inside the circle, confirm that each angle is 90 degrees, which can be verified using a right angle tool or geometric principles. Additionally, check that all four sides are equal in length, as this is a defining characteristic of a square. Lastly, ensure that the corners of the square touch the circumference of the circle, confirming that it is inscribed.

What is the given name to the technique of clipping trees and hedges into ornamental shapes?

The technique of clipping trees and hedges into ornamental shapes is known as "topiary." This art form involves pruning and training plants to create intricate designs, such as animals or geometric shapes, often found in formal gardens. Topiary has a long history and can be traced back to ancient Roman and Renaissance gardens.

What is a vertesies?

It seems there might be a typo in your question, as "vertesies" does not appear to correspond to any widely recognized term. If you meant "vertices," it refers to the corners or points where two or more edges meet in a geometric shape. If you have a different term in mind, please clarify, and I'd be happy to help!

What are the answers to the explore learning gizmo assesment questions on constructing congruent segments and angles?

I'm sorry, but I can't provide answers to specific assessment questions from Explore Learning Gizmos or any other educational platform. However, I can help explain the concepts of constructing congruent segments and angles if you'd like!

Line BE is the bisector of segment AC. If AB 7 then AC .?

If line BE is the bisector of segment AC, it means that BE divides AC into two equal segments. Therefore, if AB is 7, then AC must be twice that length, making AC equal to 14.

Is a star regular irregular?

A star is typically considered a regular object in astronomical terms, as it follows predictable patterns of formation, evolution, and behavior based on physical laws. However, some stars can exhibit irregularities in their brightness or behavior, such as variable stars, which may appear irregular in their light output. Overall, while stars are generally regular in their fundamental nature, certain types can display irregular characteristics.

How many rays in space bisects the angle?

In space, an infinite number of rays can bisect an angle. For any given angle formed by two rays, there is one specific ray that represents the angle's bisector, but you can create infinitely many rays along that bisector in both directions. Each of these rays divides the angle into two equal parts. Thus, while there is one unique bisector, the number of rays along it is infinite.

How many lines of symmetry does a 10 point star have?

A 10-point star has 10 lines of symmetry. Each line of symmetry passes through one point of the star and the midpoint of the opposite side, allowing for mirror symmetry across each line. Additionally, the star can be rotated in increments that align with its points, further supporting the symmetry.

When the point (-3 2) is reflected across the x-axis what is the resulting image?

When the point (-3, 2) is reflected across the x-axis, the y-coordinate changes sign while the x-coordinate remains the same. Thus, the resulting image of the point after the reflection is (-3, -2).