Temperature

The water density at 27 0C is 0,9965162 g/cm3.

The melting point of olivine can vary depending on its composition, typically ranging from about 1200-1450 degrees Celsius. High-pressure experiments have shown that olivine can melt at lower temperatures under certain conditions.

That depends on which degrees you mean.

Degrees are measurements of atomic movement is substances. 0 degrees is a signifier for a certain amount of movement in your given substance. If you wanted the substance to be hotter than the amount of movement would have to increase. This goes the same for making a substance colder.

Half of 0 degrees is half the atomic movement in your substance. You will need to specify Celsius, Fahrenheit, kelvin etc. to get a numerical answer.

Also, as something to think about, are you measuring the temperature (and therefore the atomic movement) of a large mass, or a small one? For a large mass could have more movement overall but still be the same temperature as a smaller one with less.

example: if we have an iceberg and a ice cube that are the same temperature, the iceberg has more movement. Therefore more heat than the ice cube but the temperature are still the same.

That depends on the material or substance or object being heated, the heat source, the current temperature of each, the specific heat capacities of each, and several other factors. There is no rate that works in general.

The boiling point of water in Dallas, Texas (elevation 430 ft) is approximately 212.1°F (100.1°C) at sea level pressure. However, this value can vary slightly based on changes in atmospheric pressure.

37.9 degrees Celsius = 100.22 degrees Fahrenheit

The melting point of protactinium is 2854 0F or 1568 0C.

The boiling point is 7280 0F or 4027 0C.

Cols is a matter of opinion and perspective, but for some people, 60oF would be considered so. Others would see it as the normal and are accustomed to it; others still would consider it unnaturally hot.

36.5 degrees Celsius = 97.7 degrees Fahrenheit

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about 96.8 degrees Fahrenheit.

According to weather.com:

"The highest recorded temperature was 99°F in August of 1948. "

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32 In this case, the answer is about 249.8 degrees Fahrenheit.

The boiling point of Mercury is 629.88 K.

A good temperature to go sledding is usually around 25-32°F (-4 to 0°C). This temperature range allows for snowy conditions that are conducive to sledding without it being too cold for prolonged outdoor activity. It's also important to consider wind chill and dress warmly accordingly.

72 degrees Fahrenheit = 22.2 degrees Celsius.

1 degree Celsius equals a change of 9/5 = 1.8 degrees Fahrenheit and 1 degree Fahrenheit equals a change of 5/9 = 0.555555555 degrees Celsius.

Pure water freezes at 320F, O0C.

Mineral water in the UK means a still or carbonated water that contains beneficial dissolved salts in low concentration. The freezing point of this would be slightly lower than pure water. (Depression of the freezing point due non volatile solutes)

81 degrees Fahrenheit would generally be considered warm or even hot, depending on personal preference and the context. It would not typically be considered cold.

The temperature of the asthenosphere ranges from about 1300 to 2400 degrees Fahrenheit (700 to 1300 degrees Celsius). This layer of the Earth's mantle is partially molten, allowing it to flow and contribute to plate tectonics. The actual temperature can vary depending on the depth within the asthenosphere.

Hail is generated by upper cloud wind driving frozen water particles up and through clouds. They gain a little more water, it gets frozen and when the wind can no longer carry it up it falls. The temperature on the ground doesn't effect this process much.

A blacksmith can judge the temperature of heated iron by its color because as the temperature increases, the iron will emit different colors of light due to its thermal radiation. This phenomenon is known as incandescence, and each color corresponds to a specific temperature range, allowing the blacksmith to estimate the temperature of the iron based on the color it is emitting.

Start by taking the number in Celsius and multiply it by 9. Then divide that number by 5, and then add 32. This is how you convert Celsius to Fahrenheit or use the equation F = (9/5)C + 32
In this case, the answer is about 91.4 degrees Fahrenheit.