Area

50 x 70 = 3,500 square feet

infrared

193

969.1 square miles.

90/8 = 11.25 = 11 rounded down

59/8 = 7.375 = 7 rounded down

11 x 7 = 77

223 sq feet = 223*12*12 = 32112 sq inches.

So, at 16*16 sq inches, there would be 32112/(16*16) = 125.4375 tiles.

If this is a real situation rather than a maths sum, the shape of the area will have an impact - unless you use every little off-cut. Also, depending on your skill, get an extra 5-10% for breakages.

1,175' x 15,840' = about 427.3 acres.

191 square inches = 0.147 yd2

By area it is Montana.

By population it is Florida.

By population denisity it is Connecticut.

It is 1/8 times bigger.

None, since there can be no conversion. A square foot is a measure of area in 2-dimensional space while a cubic foot is a measure of volumein 3-dimensional space. The two measure different characteristics and, according to the most basic principles of dimensional analysis, any attempt at comparisons or conversions between the two are fundamentally flawed.

The answer depends on the units used for the measurements given in the question.

Any non-zero value you like.

Select any length L miles where L ≥ 1.

and let B = 1/L miles. Since L ≥ 1 then B ≤ 1.

Then L*B = L*(1/L) = 1 square mile, and since the choice of L is purely arbitrary, there is no limit to the value that L can take.

100 miles * 0.01 mile

or 1 million miles * 0.000001 mile

or 1 trillion miles * 0.000000000001 mile.

A square that measures 330-ft on all sides encloses exactly 2.5 acres of area.

First you have to know how many square feet are in the room. (Length and width). Then go on google, type "convert square feet into square yards" AND go on a website, enter the number and VOLÍA!

Each 16-inch square tile covers 11/3 ft* 11/3 ft = 17/9 sq feet.

Area to be covered = 15 ft * 20 ft = 300 sq feet.

So, minimum number of tiles required = 300/(17/9) = 300*16/9 = 168.75 or 169 tiles.

That is the mathematical answer. In real life, though, the answer will depend on the extent to which off cuts are reused. While 15 tiles will do the length, you will require 12 tiles to do the width, making a total of 180 tiles in all. 169 tiles will result in a part of the area being a mosaic of tiny pieces.

A 12 x 12 tile is measured in inches, right? So, 12 inches is 1 foot, meaning each tile covers 1 square foot of space. With 234 tiles, you would cover 234 square feet of space.

There can be no equivalence.

A yard is a measure of length or distance in 1-dimensional space while a square yard is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.

1 hectare 10000 m2

⇒ 41551.71 hectare = 41551710 m2

The area of Chantraines is 10.42 square kilometers.

You can't. An infinite number of different areas can all have the same perimeter.

You have to know length and width separately before you can figure the area.

in the real world it's 123.24 inches By 45.28 inches

multipy those two then divid by 144 sq inches in a sq foot & you will get 38.75 more or less.

The formula is: 2a2=b2 Solve for a. a=sq rt (b2/2) Plug is the value for b. a=sq rt ((1.6)2/2) Do the arithmetic. a=sq rt (1.28) = 1.131 inches The biggest square is 1.131 X 1.131 inches.

1 yard3 = 764,554.8 cm3