0
Area
Area is a quantity expressing the two-dimensional size of a defined part of a surface; typically a region bounded by a closed curve. This category includes questions related to the formula for calculating the Area of a surface or how to determine the Area of a surface.
30,791 Questions
What is 4500 square feet to an acre?
1 acre = 43,560 sq ft. Divide 45,000 by 43,560 to find acreage of 45,000 sq ft: 45,000/43560 = 1.033 acres.
How many miles are in 2 acres?
"Acre" is a unit of area, and "mile" is a unit of length. They're used to describe
completely different types of quantities, and neither one can be convertd into
the other one.
If length units could be converted into area units, then you'd be able to figure
out how many square yards tall you are, and how many acres you drive when
you go shopping downtown.
If you meant how many acres are there in two squaremiles, then the answer is 1280.
How do you convert acre feet of storage to cubic yards?
To convert acre-feet to cubic yards, you can use the conversion factor that 1 acre-foot is equal to 1613.26 cubic yards. Simply multiply the number of acre-feet by 1613.26 to obtain the equivalent volume in cubic yards.
How do you get the cubic feet volume of a ball?
The diameter of a basketball is about 9.5 inches. Find the volume of air inside
it in cubic centimeters .Neglect the thickness of the ball.(Note:1in=2.54cm)
Step 1. Let D=diameter of basketball, then radius r is D/2 or r=4.75 inches
Step 2. Volume of Sphere is
Step 3.
Why does water pressure increase with surface area and fluid density?
Water pressure increases with surface area because a larger surface area means the force is distributed over a greater area, resulting in higher pressure. Fluid density also affects water pressure because denser fluids have more mass per unit volume, increasing the pressure at a given depth due to the weight of the fluid above.
373 cubic feet equals how many square feet at 1 inch deep?
Coverting cubic feet into cubic inches first: 1 foot = 12 inches, therefore 1 cubic foot = 12 x 12 x 12 = 1 728 cubic inches 373 cubic feet therefore equal 1 728 x 373 = 644 544 cubic inches. Square root of 644 544 = 802.83598 Therefore 644 544 cubic inches in an object 1 inch deep would be 802.83598 inches square. 802.83598/12 = 66.902915 feet. To answer the question fully then: 373 cubic feet equals 66.902915 square feet at 1 inch deep.
Convert 64 square inches to mL?
There is no direct conversion between square inches and milliliters as they are units of different quantities (area and volume). You would need additional information such as the height or depth of the object to convert between square inches and milliliters.
How many square feet equal an acer?
There are 43,560 square feet in an acre, assuming there are 3 feet in a yard.
Also assuming the question is about an acre (a measure of area) and not acre (a species of tree).
1 acre = 43,560 square feet
5 acres = (5 x 43,560) = 217,800 square feet
60 cubic yards equals how many tons?
The weight of 60 cubic yards of material will vary depending on the material being measured. For example, 60 cubic yards of topsoil typically weighs around 1.2 to 1.35 tons, while 60 cubic yards of gravel may weigh closer to 1.8 to 2.1 tons. To get an accurate conversion, you would need to specify the type of material.
What is the conversion of 1500 hectares in square miles?
1 square mile = 640 acres = 258.9988 hectares
1500 hectares x 1 square mile / 258.9988 hectares
= 5.79 square miles
you may try below link to convert it to other units
5 cubic yards equal how many cubic feet?
Such a conversion is not valid.
A yard is a measure of length in 1-dimensional space while a cubic foot is a measure of volume in 3-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is fundamentally flawed.
How do you convert board feet to lineal feet?
To convert board feet to lineal feet, divide the total board feet by the board's thickness in feet. For example, if you have 100 board feet of lumber that is 1 inch thick, you would divide 100 by 1, which equals 100 lineal feet.
The equation for the amount of paint needed is: (Gallons needed) = (Total square feet) / (Square feet covered by 1 gallon of paint). For 2 gallons for 750 sq feet: 2 = 750 / x, where x is the square footage covered by 1 gallon. Solve for x to find the coverage per gallon, then calculate how many gallons are needed for 1000 sq feet using the same equation with the new coverage value.
Cubic feet is a measure of volume and is calculated by multiplying the length, width, and height of an object or space. It is commonly used to measure the capacity of containers, rooms, or other three-dimensional objects. The formula for calculating cubic feet is length x width x height.
72 square feet converted to liner feet?
I do not know whatliner feet are. But I do know what linear feet are and they are of a different dimension than square feet so there cannot be a conversion.
Linear feet are a distance measurement square feet are a surface measurement.
Room is 12 feet by 12 feet how much is this in sq meters?
A room that is 12 feet by 12 feet is equivalent to 3.66 meters by 3.66 meters, which gives an area of approximately 13.39 square meters.
What is 2.1336 x 2.4384 converted into sq meters?
To convert 2.1336 x 2.4384 (in sq units) to square meters, you need to know the units of the measurements. If these are lengths in meters, then multiplying them together will give you the area in square meters. If not, you'd need to provide the units of measurement to conduct the conversion.
How many yard in 1060 sq feet?
less than one..
3 feet per yard,
3300 feet in 1100 yards
5280 feet in a mile
330/528 ths of a mile in 1100 yards.
5,000 cubic yards is the same volume as 135,000 cubic feet. If you woke up one morning and saw this gigantic ice cube out on your front lawn, and it was 51 feet long, 51 feet wide, and 51 feet high (over 3 stories), it would add up to about 5,000 cubic yards of ice, before it melted.
