Area

Nova Scotia is approximately 21,345 square miles in size.

divide the nano square meters with 10^9^2 = 10^18

43560 square feet = 1 acre 4224 square feet = ? acres (4224 x 1)/43560 = 0.09 acres

To find the cost per square foot of an acre at $700 per acre, you need to first convert the area of an acre to square feet. Since an acre is 43,560 square feet, the cost per square foot would be $700 divided by 43,560, which equals approximately $0.016 per square foot.

An acre of land is equal to 43,560 square feet, so half an acre is 21,780 square feet. The dimensions of a half-acre plot can vary depending on the shape, but a common dimension for a half-acre plot is approximately 209 feet by 104 feet.

A square meter is quite a bit larger then a square centimeter. For example the area of a square with sides 1 meter long (about three feet) is a square meter. A square with sides 1 centimeter long (a little less then a half inch) is a square centimeter. You could fit 10,000 square centimeters in 1 square meter. They are similar in that they are both measures of area in the metric system.

Because length times width equals area, 84 square inches could be something 42" x 2" or 21" x 4" or 14" x 6" or 12" x 7" or....

The question, as stated, cannot be answered sensibly. A cubic foot is a measure of volume, with dimensions [L3]. A linear foot is a measure of distance, with dimensions [L]. The two measure different things and elementary dimensional analysis teaches that you cannot convert between measures with different dimensions such as these without additional information.

3200 (square meters) = 0.32 hectares.

There are 43560 square feet in one acre. To convert 8000 square feet to acres, divide 8000 by 43560. So, 8000 sq ft is approximately 0.1837 acres.

1. Disorder. Each unit cell has its own dipole moment, which, when there is a net polarisation, are described as ordered. At high T, the direction of the dipole moments randomises, giving a disordered material with no net polarisation.
2. Phase transitions that can open up new possibilities for dipole moments to form. In this case, there is a jump at 0°C, and at 90°C, where the loop becomes taller.

9,000 square feet = a little less than 1/4 acre (0.20661157 acres)

1 hectare = 2.471 acres, 700 hectares = 1729.7 acres

1.58 kilowatts are equal to 1580 watts.

1.195990046 yd²

Algebraic Steps / Dimensional Analysis Formula 1 m²*10000 cm²

1 m²*1 in²

6.4516 cm²*1 yd²

1296 in²=1.195990046 yd²

Direct Conversion Formula 1 m²*1 yd²

0.83612736 m²=1.195990046 yd²

This question doesn't explain what exactly is the problem is.

A square meter is exactly what it says, a square that is 1m long by 1m wide or any combination of dimensions that when multiplied give a result of 1m^2 e.g. 2m long by 0.5m wide has an area of 1 meter squared.

A cubic meter is the same idea except that an extra dimension is added on so a cubic meter is a cube/box with dimensions 1m long by 1m wide by 1m tall or any combination as above.

When using equations where your given cubic meters or square meters and the answer is in the other form, treat the units as algebraic values with powers and include them in the equation so that m^3 divided by m = m^2 or vice versa.

When trying to change square meters into square centimeters go back to the basic units and work out the ratio. e.g. 1m=100cm, and 1m^2=1m by 1m so 1m^2=100cm by 100cm = 10,000cm^2

therefore 1 square meter = 10,000 square centimeters

To convert cubic yards to tons, you need to know the density of the material you are working with. Multiply the cubic yards by the density (in tons per cubic yard) to get the weight in tons. Different materials have different densities, so the specific conversion factor will vary.

I want to be sure ... when you say "a 1.5 mile square", you mean a square in which each of the 4 sides is 1.5 miles long. If that's the intent, then: Area of your square = (1.5 x 1.5) = 2.25 square miles. 1 square mile = 640 acres. 2.25 square miles = (2.25 x 640) = 1,440 acres. =============================================== If "a 1.5 mile square" means an area of 1.5 square miles, then 1.5 square miles = (1.5 x 640) = 960 acres.

To convert square meters to square centimeters, you need to multiply by 10,000 because there are 10,000 square centimeters in a square meter. So, 0.135 square meters is equal to 1,350 square centimeters.

I recommened thats wikianswers is shut- down. It is entirely NO help and has no use, this message is advice, so get answers rather than relating to others.

1 square mile is about 2,589,988.1 square meters.

1 meter square is equal to 10,000 square centimeters. This is because 1 meter is equal to 100 centimeters, and the area of a square is calculated by multiplying the length by the width, so in this case it would be 100 cm x 100 cm = 10,000 cm².

There are 43,560 square feet in an acre and a perch is equal to one square rod, which is 272.25 square feet. Therefore, there are approximately 160 perches in an acre of land.