0
Borax (sodium borate)
Borax has a wide variety of uses. It is in items from cosmetics to fire retardants. Although some countries allow it to be used as a food additive, it has been shown to cause liver cancer when consumed in high amounts over a period of time.
730 Questions
How do you make super gooey slime?
To make super gooey slime, you can mix equal parts of white school glue and liquid starch. Add a few drops of food coloring for color, and mix until the desired consistency is achieved. You can also add extra cornstarch for a thicker slime.
Do arm and hammer detergents have borax?
Arm and Hammer detergents may contain borax as one of their ingredients. It's best to check the specific product label or contact the manufacturer for confirmation.
What can be substituted for borax in making slime?
You can substitute borax in making slime with contact lens solution containing boric acid or liquid starch. These alternatives can help activate the slime ingredients and create a similar slime consistency.
No, Dawn dish soap does not contain borax. Dawn's main active ingredients are surfactants, which help break down oil and grease. Borax is a separate chemical compound commonly used as a cleaning agent but is not typically found in dish soap.
Yes, snorting borax is dangerous as it can irritate and damage the sensitive nasal passages, lungs, and throat. It can also cause serious health issues such as respiratory problems, chemical burns, and poisoning if ingested in large amounts. It is important to avoid any form of ingesting or inhaling borax for safety reasons.
Na2B4O7•10H2O is sodium tetraborate decahydrate, commonly known as borax. C4H6O2 is ethyl acetate, a colorless liquid organic compound commonly used as a solvent.
Why do you need to add glycerin to the borax and Guar gum powder when you make slime?
Glycerin helps to make the slime stretchier and more elastic. It also helps to prevent the slime from drying out too quickly and can give it a smoother texture.
What is the action of an aqueous solution of borax on litmus?
An aqueous solution of borax will have a slightly basic pH. Litmus is a pH indicator that turns blue in basic solutions and red in acidic solutions. Therefore, when litmus is added to an aqueous solution of borax, it will likely turn blue.
How do you prepare 0.01M sodium borate buffer?
To prepare 0.01M sodium borate buffer, you would mix the appropriate amounts of sodium borate and water to achieve a final concentration of 0.01M. You can use a balance to measure the mass of sodium borate needed and then dissolve it in water to make the desired volume of buffer solution. Adjust the pH as necessary with a strong acid or base.
How do you make bouncy balls with borax?
- In this one you'll need: glue, borax, food coloring, cornstarch, and warm water
- In one cup, combine the warm water, cornstarch and borax. In another cup or bowl, put the glue.
- Next, add several drops of food coloring to the white glue and stir well.
- Give your water/borax/cornstarch mixture a good stir to combine all the ingredients (the cornstarch has a tendency to settle on the bottom). Then pour the water mixture into the colored glue.
- Stir and you'll see it immediately start to clump together. Stir a bit more until you have one big, slimy glob.
- Take the glob out of the liquid and begin rolling it between the palms of your hands to form a ball. It'll be sticky at first, so keep a paper towel handy to wipe off your hands occasionally. Soon a rubbery ball will form. (We found that just using our palms seemed to work better than using our whole hands and fingers.)
- Once the stickiness is gone and you have a nice smooth ball, that's it! You can bounce away!
The balls will flatten out after sitting for a while, but storing them in small plastic containers and then rolling them between your palms again will help the super bouncy balls regain their shape.
This is what you'll need: borax (found in the laundry section of the store)
- cornstarch (found in the baking section of the store)
- white glue (e.g., Elmer's glue - makes an opaque ball) or blue or clear school glue (makes a translucent ball)
- warm water
- food coloring (optional)
- measuring spoons
- spoon or craft stick to stir the mixture
- 2 small plastic cups or other containers for mixing
- marking pen
- watch with a second hand
- metric ruler
- zip-lock plastic baggie
- 1. Label one cup 'Borax Solution' and the other cup 'Ball Mixture'.
- 2. Pour 2 tablespoons warm water and 1/2 teaspoon borax powder into the cup labeled 'Borax Solution'. Stir the mixture to dissolve the borax. Add food coloring, if desired.
- 3. Pour 1 tablespoon of glue into the cup labeled 'Ball Mixture'. Add 1/2 teaspoon of the borax solution you just made and 1 tablespoon of cornstarch. Do not stir.
- 4. Allow the ingredients to interact on their own for 10-15 seconds and then stir them together to fully mix.
- 5. Once the mixture becomes impossible to stir, take it out of the cup and start molding the ball with your hands.The ball will start out sticky and messy, but will solidify as you knead it. Once the ball is less sticky, go ahead and bounce it! You can store your plastic ball in a sealed Ziploc bag when you are finished playing with it. Don't eat the materials used to make the ball or the ball itself. Wash your work area, utensils, and hands when you have completed this activity
- .
- Hope this helps!
Why you use borax in schontetens reaction in identification of anthraquinone glycosides?
Borax is used in the Schotten-Baumann reaction to identify anthraquinone glycosides because it reacts with the anthraquinone to form a precipitate. This reaction is specific for anthraquinone glycosides and does not occur with other types of glycosides.
Is borax and boric acid used as a wood preservative?
Yes, both borax and boric acid can be used as wood preservatives. They are effective in protecting wood from fungi, termites, and other pests while being less toxic to humans compared to other chemical preservatives. Borax and boric acid are often used for treating interior wood that is not exposed to weather or ground contact.
Is Borax safe to use when washing colored clothes?
Borax can be used when washing colored clothes, but excessive use may cause colors to fade over time. It is best to follow the recommended usage instructions on the product packaging to ensure the safety of your colored clothes.
Why use borax to make snowflake crystals?
Borax is used to make snowflake crystals because it forms a supersaturated solution when dissolved in water, allowing for crystals to grow on a pipe cleaner or string dipped into the solution. The shape of the crystalline structure resembles snowflakes, making it a fun and easy DIY project for kids and adults alike.
Borax is typically white in color, though it can appear as a colorless crystal or powder.
What happens when you put borax crystals in hot water?
When borax crystals are placed in hot water, they dissolve due to the increased kinetic energy of the water molecules, breaking the crystal structure. This forms a solution of borax in water, which can be used for various applications such as cleaning, laundry, or as a flux in metallurgy.
What happens if you mix iodine with borax?
When iodine is mixed with borax, it can form a complex known as "iodine monochloride borate." This compound may exhibit unique properties such as altered solubility, color changes, or reactivity compared to the individual components. It is important to handle and dispose of this mixture properly due to the potential chemical reactions that can occur.
Boric acid typically has a slight odor that is described as odorless or slightly sweet. The smell can be subtle and not easily detectable by everyone.
How do you make slime with bleach?
It is not safe to make slime with bleach as it can be harmful if it comes in contact with skin or is accidentally ingested. It is recommended to use safer ingredients such as glue, borax, or liquid starch to make slime.
No, borax powder is not the same as Eno. Borax powder is a naturally occurring mineral used primarily as a cleaning agent and insecticide, while Eno is an over-the-counter antacid used for relieving heartburn and indigestion.
Borax is a compound because it is a chemical substance composed of boron, sodium, and oxygen atoms bonded together in a specific ratio. A compound is formed when two or more different elements chemically combine to create a new substance with unique properties, which is the case with borax.
