Facts about the colossus computer?
The Collossus Computer was made by Thomas Flowers it cost £1000 out of his own pocket and it helped crack the Enigma code. Alan Turin used it to break the code. It was the worlds first programmable electronic Computer it lived at bletchley house at the original was destroyed in the second world war. The Collossus mk 2 is a revamped version of the original collussus it gets very hot and is one of the uks national treasures. The Man who made it didn't get remembered as well as Alan Turin but he was just as great. The Collossus was like a switchboard. It nearly didn't get made the boss of Thomas Flowers told him to forget it but he refused and made it out of his own pocket. Men like Thomas Flowers and Alan Turin were literally Computer Heroes most incredible computer legends of their time. The Collossus mk2 can
be seen at bletchley house. And The Collossus is literally huge that's why it's called Collussus like a Supercomputer of today in terms of size
Do you need computers in high school?
Computers are a tremendously important tool in modern society, so for schools or colleges NOT to have computers would be folly in the extreme.
Difference between void pointer and null pointer?
A Null pointer has the value 0. void pointer is a generic pointer introduced by ANSI. Before ANSI, char pointers are used as generic pointer. Generic pointer can hold the address of any data type.
Pointers point to a memory address, and data can be stored at
that address.
How can I install a disk from my last computer into my new computer?
just link the data line of the new computer
How do you convert a rar movie to a zen vision m format?
First, RAR is an archive file. NOT a movie file. Get winrar from http://www.rarlabs.com (The Command/Graphic Version). It will last 30 days without notice, but then all u do is click close.
What is the importance of knowledge in building and A.I. System?
A device cannot have artificial intelligence withour information being programmed into it. Therefore, the computer must be gifted with some knowledge before it can figure things out on its own.
What is the difference between administrator and developer?
An administrator is the person who deals with the day to day functions of a computer network and/or system. The developer is the person who created the specific system and/or program.
What is the process of knowing IP address of a computer system?
To get your specific computers internal network IP, Go to Start > Run.
In the Run window type CMD and click Ok.
In the command prompt enter the command ipconfig your IP address will be listed under your local connection (your Internet connection).
To get the IP address that your network is using on the internet, go to whatismyip.com
What directory structure is described by the path XYZ?
It's a directory path. Paths are often expressed by listing the directories along the path separated by slashes. For instance, animals/prehistoric/dinosaurs would represent the path starting
at the directory named animals, passing through its subdirectory named
prehistoric, and terminating in the sub-subdirectory dinosaurs.
Information requires a mind, data is a series of states in the computer. It's like the difference between hearing and listening, one requires a mind the other doesn't.
What is the major limitation of the CDROM as a storage medium for multimedia?
CD's speed, size (amount of data it can hold) and the fact it is W.O.R.M., Write Once, Read Many vs W.M.R.M, Write Many, Read Many (Harddrive for example) are the major drawbacks for the CDRom as multimedia storage.
Forward Engineering:
"Forward engineering is the set of engineering activities that consume the products and artifacts derived from legacy software and new requirements to produce a new target system."
A LAN (Local Area Network) card is an electronic card that is placed in an expansion slot on the motherboard. This will allow you to connect your computer to a cable or DSL modem. Nowadays, these LAN ports are built right into the motherboard themselves. It was the older models that required the LAN card.
Answer-- A Local Area Network (LAN) card is used to provide wireless Internet access to computer users in home or roaming networks. It works by exchanging signals with a router, which transmits the signals over a physically wired line. The LAN card became ubiquitous in Western society in the early part of the twenty first century, when the cards became affordable due to wireless networks springing up everywhere, from coffee shops to airports.
Most home Internet users use a LAN card for wireless Internet access so that multiple residents can be on the Internet at the same time. The router is placed in a central location in the home to provide even signal across the household. Wireless networks are also widespread on college campuses, so that students with laptops can use the Internet wherever they may be. The value of wireless to attract customers has been recognized by restaurants and other such businesses, who usually provide network access in exchange for a small fee or purchase of their product.
A LAN card communicates with the router using radio waves and an antenna. The computer converts data into binary form and sends it to the LAN card, which in turn broadcasts the signal to be picked up by the router. The router sends the information on in the form of packets of information, and bundles information for return to the computer via the LAN card in the same way. Usually wireless networks transmit at a relatively high frequency, ranging between 2.4 and 5Ghz, designed to accommodate the more rapid transfer of large amounts of data. When purchasing a router or LAN card, the packaging will indicate the frequency of the signal it uses.
Multiple users can maintain a connection to the router on different bands, to avoid interference, and are assigned unique identities by the router in the form of an IP address. Each user attempting to access the network will need a LAN card, which is either available built into the computer or as an external attachment which can be connected through a Universal Serial Bus port or PC card slot in a laptop.
Networks have a variety of security settings, with some being accessible to all users and other requiring a password to access the router. Even when a network is secured, a LAN card will be able to see it and list it as an available network, but when asked to connect will prompt the user for a password. It is recommended that wireless networks be secured to prevent the exploitation of vulnerabilities, and that users never connect to an unknown network.
A LAN card is a circuit board which allows you to access a network (Such as that within your workplace, or educational facility).
How do I stop stop someone from logging into my computer?
Install Vitamin D Video it can set off a sound deterrent if you have a webcam otherwise simply add a password to your user account and lock your computer
Instructions:
Lock my computer: Windows/7/vista, Control+Alt+Delete and press lock this computer
How do you get an error deleated from your computer?
To remove the error you should run a registry cleaner program on your computer. The registry of your computer contains the configuration and settings files and if there's a problem with the files it will cause an error on your computer. Registry cleaners will identify problematic files in the registry and help you repair or remove them.
Tape storage is primarily used for archival storage. The recording medium is a thin polyester tape between 0.38cm and 2.54cm wide, about .025mm thick and coated with magnetic particles. The tape is wound on wheels of various sizes. Data is recorded sequentially, one byte after the other, from the beginning of the tape to its end. Access times for tape storage are much slower than for floppy diskettes or hard disks.The following diagram shows how data is stored on the disk. The read/write head is comprised of several tracks, 9 tracks being very common. This means nine bits are recorded across the width of the tape simultaneously. Using nine tracks, one byte of data plus a parity bit is recorded at a time (vertically). Characters are grouped together to form a record (often called a block). Each record is separated from the next record by a blank inter-record gap (IBG). Each record is preceded by a header field. The IBG allows the software to position the tape for recording or playing at specific record numbers. Physical markers are used to indicate the ends of the tape, and may be metallic foil, clear plastic or software markers encoded on the tape. Software encoding uses BOT(beginning of tape) and EOT (end of tape) indicators. IRG=IBG
What is the differences and similarties of data transmissions?
Would you like to know wired or wireless transmissions? There are so many types of wireless transmissions, and I do not know about them. But there are two main types of wired transmissions. The all popular parallel and serial transmissions. Parallel uses a cable consisting of 8 wires where 1 bit of information is sent through each wire at a time. Hence 8 wires, 8 bits of info... parallel trans. Then there is serial transmission which uses 2 wires to send send 1 bit at a time, but there are 2 ways for back and forth communication. Besides older computers there really isn't anything that uses either of these transmission standards anymore except universal serial bus, also known as USB. There are 4 wires in any usb device or cable, 2 are used for transmission, 1 for power and 1 for ground.
Suggestions for mini project in data structures using c?
1. Define a structure?
A. A structure is a set of variables positioned under one name, offering a suitable means of relevant information together. Declaration of structure creates a template which can be used to produce structure objects that are called as its instances. The variables which form the structure are called as members, also referred as fields or elements.
2. Define a pointer?
A. A pointer is nothing but a reference to some memory location. As a computer has billions or may be even trillions of cells, every cell can be filled with some data. With the help of pointers, one can know and access the value of its memory cell and its location.
3. What are the advantages of a pointer?
A. Dynamic Memory Allocation, Passing structures and array to functions, creating data structures like linked lists, trees and so on, and passing addresses to functions.
4. Define static variable?
A. A special variable which is stored in the data segment not like the default auto variable that is stored in stack, is called static variable. It can be initialized through using keyword static before variable name.
5. How are structure passing and returning implemented?
A. When you pass structures as arguments to functions, the whole structure is usually pushed on the stack, through as several words as are needed. To avoid this overhead, programmers usually opt to use pointers to structures instead. Some compilers simply pass a pointer to the structure, even though they have to produce a local copy to save pass-by-value semantics.
Structures are usually returned from functions in a position pointed to by an additional, compiler-supplied hidden argument to the function. Few older compilers used to use unique, static locations for structure returns, though this made structure-valued functions non-reentrant that ANSI C disapproves.
6. Why can't we compare structures?
A. We do not have one or fine way for a compiler to apply structure evaluation that is constant with lower level flavor of C. A plain byte-by-bye comparison could be found on random bits available in unused 'holes' in the structure; such filling is used to maintain the arrangement of following fields accurate. A field-by-field assessment may require improper amounts of recurring code for larger structures.
7. Why doesn't struct x { … };x thestruct; work?
A. C is not similar to C++. Typedef names are not automatically produced for structure tags
8. Why doesn't this code: a[i] = i++; work?
A. The subexpression i++ creates a side effect. It changes i's value which directs to undefined behavior as i as well is referenced somewhere else in the same expression
9. Can we initialize unions?
A. ANSI C permits an initializer for the foremost member of a union. We do not have any standard method of initializing other members (there is no way even under a pre-ANSI compiler to initialize a unionl)
10. Can main () be called recursively?
A. Yes, any function that has main() could be called recurrently.
11. Are the variables argc and argv are always local to main?
A. Yes, argc and argv are local to main
12. What would be the similar pointer expression for referring the equivalent element as a[p][q][r][s]?
A. *( * ( * ( * (a+p) + q ) + r ) + s)
13. Are the expressions *ptr ++ and ++ *ptr same?
A. No. *ptr++ increments pointer, not the value pointed by it. Where as ++*ptr increments the value being pointed to by ptr.
14. What are the benefits of using array of pointers to string instead of an array of strings?
A. (i) Effective usage of memory
(ii) Simpler to swap the strings through moving their pointers when sorting
15. Discuss on pointer arithmetic?
A. (i) Assigning pointers to the similar kind of pointers
(ii) Subtracting or adding a pointer and an integer
(iii) comparing and subtracting two pointers
(iv) Decrementing or incrementing the pointer that are pointing to the elements of an array while a pointer to an integer is added by one, the address is added by two. The Compiler does this automatically.
Assiging value 0 to the pointer variable and comparing it with the pointer. Pointer consisting 0 points to nothing at all
16. What is the invalid pointer arithmetic?
A. (i) Adding, dividing and multiplying two pointers
(ii) Adding double or float to pointer
(iii) Masking or shifting pointer
(iv) Assigning a pointer of one type to another type of pointer.
17. Is the allocated space within a function automatically deallocated when the function returns?
A. None of the pointers are similar to that of what they actually point to. Local variables like local pointer variables in a function are automatically deallocated if function returns. However, coming to a local pointer variable, deallocation is nothing but the pointer being deallocated and not blocking of memory allocated to it. Memory that is allocated dynamically always continues till the program terminates or allocation is freed.
18. What are the pointer declarations used in C?
A. (i) Pointers to an array
(ii) Array of pointers
(iii) Pointer to a data type
(iv) Pointer to a pointer
(v) Function returning a pointer
19. Can we use any name in place of argv and argc as command line arguments?
A. Yes. We can certainly use any user defined name instead of argc and argv.
20. Difference between an array of pointers and a pointer to an array?
A. Array of pointers
(i) Declaration - data type *array_name[size]
(ii) Size indicates size of the row
(iii) The space for columns may be dynamically allocated
Pointer of Arrays
(i) Declaration - data_type (*array_name)[size]
(ii) Size indicates size of the column
21. Difference between an array name and a pointer variable?
A. A pointer variable is a variable while an array name is not a variable but is a fixed address. Unlike a pointer variable, array name cannot be initialized. An array name being a constant value, - and ++ operators can not be applied to it.
22. What is the purpose of rewind()?
A. The rewind() function is used to get the file pointer to the starting of the file. Rewind (fp);
Fp is a file pointer.
And we can get similar effect through
feek(fp,0,0);
23. What is the purpose of ftell?
A. The ftell() function is used to get the current file referred by the file pointer. ftell(fp); returns a long integer value referring the current location of the file pointed by the file pointer fp. If any error occurs, it will return -1.
24. What is a random access file?
A. A file can be accessed at random through function fseek(),
fseek(fp,position,origin); file pointer number file pointer fp positions number of bytes offset origin from 0, 1 or 2 denoting the starting, current or end position of the file respectively.
25. How is fopen()used?
A. The fopen() function return a file pointer. So a file pointer is declared and is assigned as
FILE *fp;
fp=fopen(filename,mode);
26. How is a file closed?
A. A file is closed using fclose() function
27. What is a file pointer?
A. The pointer to a FILE data type is known as a file pointer or a stream pointer. This pointer points to the block of information of the stream/file that had just been accessed.
28. What is a stream?
A. A stream is nothing but source of destination of data or simply data that is associated with a hard disk or other input/output device. The source stream that offers data to a program is known as input stream and the source stream that receives the result from the program is known as output stream.
29. What is meant by file opening?
A. The process of connecting a program to a file is known as file opening. It needs I/O stream creation in advance to writing or reading the data.
30. What exactly is a file?
A. A file is an area of storage in auxiliary storage devices or in hard disks. It includes information in bytes.
31. What are the types of files?
A. Files are of two types
1-high level files (stream oriented files) - These are accessed through library functions
2-low level files (system oriented files) - These are accessed through system calls
32. What is the difference between the functions memmove() and memcpy()?
A. The arguments of memmove() can overlie in memory, while the arguments of memcpy() cannot
33. What do the functions atoi(), itoa() and gcvt() do?
A. atoi() is a macro that converts integer to character.
itoa() It converts an integer to string
gcvt() It converts a floating point number to string
34. How would you use the functions randomize() and random()?
A. Randomize() initiates random number generation with a random value.
Random() generates random number between 0 and n-1
35. What are the two forms of #include directive?
A.
1. #include"filename"
2. #include
36. What are the facilities provided by preprocessor?
A. File inclusion, substitution facility and conditional compilation
37. What is a preprocessor? What are the advantages of preprocessor?
A. Preprocessor practices the source code program before it is sent through the compiler.
(i) It includes the readability of a program
(ii) It helps in easier modification
(iii) It facilitates writing convenient programs
(iv) It helps in easier debugging
(v) It helps in testing a portion of program
(vi) It enables implementing comprehensive program
38. Define bit fields? Point out their uses in Structure declaration?
A. A bit field is a group of adjoining bits in a one execution based on storage unit which we call as a "word".
Usually, the field definition's syntax and access is based on a structure.
Struct {
unsigned int k :1;
unsigned int l :1;
unsigned int m :1;
}flags;
The number that is preceeding the colon indicates the field width. And flag is a variable that includes 3 bit fields.
39. What is the maximum combined length of command line arguments including the space between adjacent arguments?
A. It depends on the operating system
40. Compose a program to swap two variables without the help of third variable.
A. a^=b;
b^=a;
a^=b;
In the above program, the numbers are converted into binary numbers and then xor operator is executed.
41. What is pre-increment and post-increment?
A. ++num (pre-increment) increases value of num before it is used in the expression, where num++ (post-increment) increases the num after its value is used.
42. Difference between logical vs syntax errors?
A. Logical error:
It occurs by a wrong algorithm or a mistyped statement in such a way that it does not violate the syntax, and these are difficult to find.
Syntax error:
It involves syntax validation, and compiler prints diagnostic message.
Ex: a=b
43. What are C identifiers?
A. C identifiers are the names given to different programming elements like arrays, functions and variables. It is usually a combination of a letter, a digit and an underscore. It should start with a letter, and backspace is not allowed.
44. What are C tokens?
A. There are 6 classes of C tokens - keywords, constants, identifier, operators, string literals and other separators.
45. What do the 'c' and 'v' in argc and argv stand for?
A. The c in argument count, argc stands for the number of the command line argument that the program is invoked with. And v in argument vector, argv is a pointer to an array of the character string that contains the argument.
46. Difference between array and pointer?
A. Array:
(i) Arrays allocate space, automatically
(ii) They can not be reassigned
(iii) They can not be resized
(iv) sizeof (arrayname) returns the number of bytes occupied by the array.
Pointer:
(i) Assigned explicitly to point an allocated space.
(ii) It can be reassigned
(iii) It can be resized using realloc() function
(iv) sizeof (p) gives the number of bytes used to store the pointer variable p.
47. Compose a program using Command Line Arguments?
A.
#include
void main(int argc,char *argv[])
{
int i;
clrscr();
for(i=0;i
printf("\n%d",argv[i]);
}
48. Write a program which employs Recursion?
A. int fact(int n) { return n > 1 ? n * fact(n - 1) : 1; }
49. How can we read/write Structures from/to data files?
A. To compose a structure fwrite() can be used as Fwrite(&e, sizeof(e),1,fp); Here, e is a structure variable. A consequent fread() invocation will be able to read the structure back from file. Calling function fwrite() will write out sizeof(e) byte from the address & e. Data files that are written as memory images with function fwrite(), but will not be portable, especially if they include floating point fields or pointers. It is because structures' memory layout is compiler and machine dependent. Hence, structures written as memory are not need to be read back by programs running on other machine, also this is an important factor if the data files that you are writing will ever be exchanged between machines.
50. Can a Structure contain a Pointer to itself?
A. Yes such structures are called self-referential structures.
Other Questions
What is the similarity between a Structure, Union and enumeration?
How are Structure passing and returning implemented by the complier?
What is the difference between an enumeration and a set of pre-processor # defines?
Is it possible to have more than one main() function in a C program?
Difference between formal argument and actual argument?
What are built in functions?
What is an argument?
What is a function?
What modular programming?
Why is it necessary to give the size of an array in an array declaration?
Is it possible to have negative index in an array?
Difference between linker and linkage?
What is an array of pointers?
What is pointer to a pointer?
What is the purpose of realloc?
What is dynamic memory allocation?
What is static memory allocation?
How pointer variables are initialized?
Are the expressions arr and &arr same for an array of integers?
What is generic pointer in C?
What does the error 'Null Pointer Assignment' means and what causes this error?
Are pointers integer?
What is a NULL Pointer? Whether it is same as an uninitialized pointer?
In C, why is the void pointer useful? When would you use it?
What is near pointer?
What is a normalized pointer, how do we normalize a pointer?
What is a huge pointer?
What is a far pointer? Where do we use it?
What is the difference between Strings and Arrays?
What the advantages of using Unions?
What is storage class? What are the different storage classes in C?
Differentiate between a for loop and a while loop? What are it uses?
What is recursion?
Difference between strdup and strcpy?
Out of fgets() and gets() which function is safe to use and why?
Can we specify variable field width in a scanf()
What is the use of typedef?
What are register variables? What are the advantages
Describe about storage allocation and scope of
Can a sonar machine identify the object showing up on the sonar?
Sonar (which stands for SOund NAvigation and Ranging) can be made to identify the object it pings on - if active sonar; if passive sonar, identify the object making the sound it picks up. The higher the frequency of the active sonar ping, the better the resolution - but the shorter the range. At higher resolutions, it is not hard for the sonar to identify the object it pings on. At lower frequencies, the range is greater but it is harder for the sonar to identify what is being pinged. Another benefit of active sonar is the range and direction of the target can be discerned. Passive sonar just listens to the ambient water. Identification of the sound source can be made if the frequencies of the target making the sound are known and identified in a database. One problem with passive sonar is that it is hard to know the range of the target making the sound, although the direction will be known. Water temperature and depth have a great effect on sonar, so this must be taken into account when calculating distance. Sonar is used in the Military, Geological Surveying, and the Medical field.
What was the need for the computer?
The need of the computer was to help people look up stuff
They first were used for math. . Over time they accomplished multiple tasks.
What kind of Ram can cause a computer to run slow?
DDR RAM is the slowest type of RAM and can cause the computer to run slower