answersLogoWhite

0

Elevations

Geographically, elevation refers to the geometric height after a fixed reference point. Elevations can be measured by using the Earth’s sea level and the Earth’s center as reference points, but the former is used more commonly.

3,045 Questions

How many meters above sea level is Reykjavik?

It varies from 0-125m. The central area is about 0-35m

What is the elevation of mt orizaba?

According to summitorizaba.com the elevation of mt orizaba is 18,700'

How do you shoot elevation with a transit?

Grade rods are graduated in feet, tenths, and hundredths of feet. The rod is used to determine differences between ground elevations at two points. A level of some kind is necessary.

You start from a point of known elevation or height, for example, the point along a road under construction where a cut slope will intersect the ground surface. That point will be shown on the plans and cross sections, and will be established by surveyors in the field. Usually they will pound a stake in the ground and the actual catch point will be a nail with whiskers. To check the elevation difference between that point and some other point (let's say, the point on the ground directly above where the road centerline will be) you need to occupy the lowest point with the grade rod. What you do is sight along a level line (usually with a hand level, held against the grade rod) to the point that is higher. You move up and down the grade rod until the level line of sight hits the point of known elevation -- or a point of known distance above the known point (which you can establish with a piece of survey lath, a measuring tape and a magic marker).

Let's say you are on the side of a hill and the cut slope stake is up there someplace, indicating what the vertical distance (cut) will be between that point and centerline. You don't make the vertical cut there, of course, you make the cut above centerline. But at centerline the ground surface is lower so in order to know what to cut, you need to know how much lower the ground surface is. You occupy the centerline with the grade rod, holding it vertical. You get out your hand level and, holding it against the grade rod, find the cut slope stake at ground level (or the point of known vertical distance you marked on the lath above it). You move the hand level up and down the grade rod, maintaining it level, until you are sighting that point at the cut stake. Then the number opposite the hand level on the grade rod is the elevation difference between the point you are occupying at centerline and the point you are shooting to. If you were at 6.3 ft on the grade rod and you shot to a point 2.5 ft above the catch point nail, the elevation difference between the ground where you were and the catch point is 6.3-2.5=3.8 ft. So whatever the stake says the cut to centerline is, you can subtract 3.8 ft because the ground above centerline is 3.8 ft less than it is where the stake is.

You occupy the low point with the grade rod, because you have to shoot along a level line to a higher point. If the point you are shooting to is to high to get to in one shot, you do it in steps and add them up.

What is the lowest point in Asia and how low is it?

The lowest point in Asia (and the world) is the Dead Sea Shore. It is 1369 feet below sea level. It is located in Jordan.

What is the maximum altitude of denman orchard?

159 feet although its not a real place its just used for the textbook.

What is the top elevation of wisp ski resort?

Top Elevation: 3115 Ft. Bottom Elevation: 2415 Ft.Vertical Drop: 700 Ft.

What are the muscles involved in shoulder elevation?

The muscles involved in elevating the shoulder girdle (e.g. shrugging your shoulders) are the upper fibers of trapezius, levator scapulae, rhomboid major and rhomboid minor.

What capital city has the highest altitude above sea level?

Quito, Ecuador (Highest Legal Capitol)

La Paz, Bolivia (Highest Administrative Capitol)

What does an automatic level do?

How to transfer an elevation with an automatic level

Lowest continental point in the world?

Australia is the lowest/flattest continent in the world.

What is the highest point in UK?

esto esuna mierda xke no sale lo ke te pide...no OS fies de esta pagina

Ben Nevis.

If your wondering what the guy before wrote, it said that Answers.com sucked. lol

Anyway, yeah it's Ben Nevis.

What is the altitude of Sault Ste Marie?

About 580m above mean sea level. This is the altitude at the Sault Ste. Marie Water Aerodome.

Source: Wikipedia.

What is the elevation of Rutherfordton NC?

According to the folks at Marchman Field Airport, the elevation of the airport is 1077 ft. The elevation of the town itself may be slightly different.

Sea level in ladner bc?

LADNER,BC is at about 49.08°N 123.07°W. Height about 9m / 29 feet above sea level

On a topographic map he difference in elevation between two side-by-side contour lines is called?

The difference in elevation between two side-by-side contour lines on a topographic map is called the contour interval. It represents the vertical distance between each contour line and helps depict the steepness of the terrain.

Which is higher in elevation the Cascade Range the Mojave Desert or the Ozark Plateau?

The Cascade Range is higher in elevation compared to the Mojave Desert and the Ozark Plateau. The Cascade Range includes several peaks over 10,000 feet in elevation, while the Mojave Desert and the Ozark Plateau have lower elevations overall.

What is Highest point in the Britain?

The highest point in Britain is Ben Nevis, which stands at 1,345 meters (4,413 feet) above sea level. It is located in Scotland and is a popular destination for hikers and climbers.