answersLogoWhite

0

Fork Oil

Fork oil is used in motorcycle suspensions. In addition to keeping them lubricated, it also used for front suspension pressure. Fork oil comes in different weights and viscosities.

826 Questions

Fork oil quantity you need for a 1996 zx7r?

about 430ml of 10w (manual says 5w but everyone is using 10w, even shops recommends 10w)

Putting the fork down what does it mean?

"Putting the fork down" generally symbolizes pausing or stopping eating, often as a metaphor for taking a break from indulgence or reflecting on one's habits. It can also imply making a conscious decision to be mindful about food intake and listen to one's body signals. Additionally, in a broader context, it may suggest stepping back from a situation to gain perspective or reassess priorities.

What is the fork oil capacity for 1988 gl1500?

320 cc right fork. 325 cc left fork gives best ride.

What is Fork oil capacity for 1974 Honda CB 550?

According to my Haynes manual. oil capacity per leg is 5.4 ounces.

How much fork oil GL 1200?

345 cc or ( 11.7 oz ) in each fork. Just make sure to have equal amounts.

How much fork oil goes into a Kawasaki ZG1200 1995?

According to the American Voyager Association:

"We would suggest changing the fork oil should be a regularly scheduled maintenance item. It should be done every other year! Recommended oil is 10w fork oil. There are two ways to go about changing the oil. The easy way is to drain out the old oil from the plug at the bottom of the fork. Remove the wheel and pump the lower fork tube up and down until no more oil comes out. When changing the oil, the shop manual says replace it with 330mL of new oil. However, if you completely remove the fork, disassemble it, and clean it, the shop manual recommends 391mL + or- 2.5mL. I have never figured out why, but many times each fork will require more or less fluid to reach the correct height in the fork tube. The correct way to put just the right amount of fluid in, is to pump the lower fork tube up and down several times to get the fluid into all of the cavities. After doing this, fully compress the fork tube and measure down from the top 140mm + or - 2mm. This is the correct amount of oil to have in each fork with stock fork springs. Sometimes you have to add some fluid, other time you need to take some out. But this is the only way to make sure both forks have exactly the right amount of fluid.

What is the fork oil level for 01 ktm 50 advinture?

110 ml per leg . i found 5wt - 7.5 wt works best

What is the fork of the original Aircrack project?

Aircrack-ng is the fork of the original Aircrack project. It is a wireless WEP/WPA cracking utility that can recover up to 512-bit WEP keys once enough packets have been gathered.

What is the fork oil level for motohispania ryz?

The fork oil level for the Motohispania RYZ typically ranges between 90 to 120 mm from the top of the fork tube when fully compressed. However, it’s essential to consult the owner's manual or a service manual for specific recommendations, as different models or modifications may require different levels. Always ensure to use the appropriate type and viscosity of fork oil for optimal performance.

How much fork oil for fzr 600 1989?

20wt oil 435ml/cc on each tube 102mm down from tube with springs out fully compressed