Fork Oil

The Aprilia RX50 typically requires about 500ml of fork oil per leg, totaling around 1 liter for both forks. However, it's essential to check the specific service manual for your model year, as specifications may vary slightly. Always use the recommended fork oil type and viscosity for optimal performance.

For a 1993 Suzuki GSX1100G, the front forks typically require about 10 weight fork oil. The total capacity is approximately 500 ml (or about 16.9 ounces) per fork, but it’s advisable to check the service manual for the exact specifications and recommended levels for your specific model and riding conditions.

The fork oil capacity for a 2006 Honda VT 600 CD is approximately 480 ml (16.2 ounces) per fork leg. It's important to use the recommended fork oil type and viscosity, typically 10W, to ensure optimal performance. Always refer to the owner's manual for specific maintenance guidelines.

The 1995 Yamaha Virago 125 typically requires about 0.9 liters (approximately 30 ounces) of fork oil for both forks combined. It's important to use the recommended type of fork oil, usually 10W, and to check for any specific service guidelines in the owner's manual. If you are performing maintenance, be sure to also replace the fork seals if they are worn. Always confirm with the manufacturer’s specifications for the most accurate information.

For a Suzuki JR50, the recommended front fork fluid is typically 10-weight fork oil. The amount needed generally ranges from 110 to 120 milliliters per fork, depending on the specific model and year. It's important to check the owner's manual or service guide for precise specifications, as variations may exist. Always ensure the forks are properly serviced and inspected for optimal performance.

The 2005 Yamaha TTR 50 typically holds about 90 ml (3.0 oz) of fork oil per fork leg. It's important to use the correct type and weight of fork oil specified in the owner's manual for optimal performance. Always ensure to check the oil level and condition during maintenance.

The oil capacity for the forks of a Honda NC750X is typically around 400 ml (approximately 13.5 ounces) per fork. However, it's important to consult the owner's manual or a service manual specific to your model year for the exact specifications and recommendations, as variations may exist. Additionally, ensure to use the recommended fork oil type and viscosity for optimal performance.

The Honda Gold Wing GL1500 has an oil capacity of approximately 4.5 quarts (4.3 liters) when including the oil filter change. Without the filter, the capacity is around 4.0 quarts (3.8 liters). It's important to check the owner's manual for specific recommendations and to ensure proper maintenance.

The fork oil capacity for a 2008 Harley-Davidson Road King is approximately 11.5 ounces (or about 340 milliliters) per fork leg when performing a standard fork oil change. It's important to use the recommended type of fork oil, typically a 5-weight or 10-weight oil, depending on your riding preferences. Always refer to the owner's manual for specific guidelines and procedures for your motorcycle.

The Yamaha TW200 typically requires about 11.4 ounces (or approximately 340 milliliters) of fork oil per leg when servicing the front forks. It's essential to use the recommended fork oil type and viscosity, often 10W, to ensure optimal performance. Always consult the owner’s manual for specific details and any updates regarding maintenance.

For a 2004 Harley-Davidson Softail, the front fork typically requires about 12 to 13 ounces of fork oil per leg, depending on the specific model and whether you are changing the seals or just doing a fluid change. It's important to use the correct type of fork oil, usually a 5W or 10W, depending on your riding style and preferences. Always refer to the owner's manual for the most accurate specifications and follow proper procedures during the oil change.

The 2019 and newer Kawasaki KX450F typically requires about 450ml of fork oil per leg, but the exact amount can vary slightly depending on the specific model year and modifications. It's essential to check your owner's manual for the correct specifications and recommended oil type. Additionally, ensure you set the proper oil level after filling, as this can impact fork performance.

The 1997 Suzuki GSX-R600R typically requires about 490 ml of fork oil per leg for the front forks. However, it's crucial to check the owner's manual or service documentation for the specific oil capacity and recommended oil type, as it can vary based on modifications or maintenance history. Always ensure the forks are properly serviced and filled to the correct level for optimal performance.

For a 1999 Harley-Davidson FXST, the front fork typically requires about 11 to 12 ounces of fork oil per leg, depending on the specific model and modifications. It's essential to use the correct type and weight of fork oil recommended by the manufacturer, usually around 10W or 15W. Always consult the owner's manual or a service manual for precise specifications and procedures.

The fork oil capacity for each cartridge of a 2006 Yamaha R6 is approximately 470 milliliters (ml). It is essential to use the recommended type and viscosity of fork oil, typically 10W, to ensure optimal performance. Always consult the owner's manual or service guide for specific details and recommendations.

The 1980 Kawasaki KZ750 typically requires about 10.5 ounces (approximately 310 ml) of fork oil per fork. However, it's important to check the specific model and manual for exact specifications, as variations can exist based on the fork type and condition. Always ensure to use the recommended oil type and viscosity for optimal performance.

The 1995 Honda CR125 typically requires approximately 400cc (or about 13.5 ounces) of front fork oil per leg. It's important to use the recommended oil type and viscosity, usually 10W, for optimal performance. Always refer to the owner's manual for specific details and maintenance recommendations.

The 2005 Harley-Davidson Deluxe typically requires about 13.5 ounces (approximately 400 ml) of fork oil per leg for its front forks. It's important to use the recommended type of fork oil, usually a 5W or 10W, depending on your riding style and conditions. Always refer to the owner's manual for specific specifications and guidelines for oil changes and maintenance.

The fork oil capacity for a 1993 Yamaha YZ 250 is approximately 550 cc (or about 18.6 ounces) per fork leg. It’s important to refer to the owner's manual or service manual for specific details, as variations may exist based on modifications or maintenance history. Always ensure to use the recommended oil type and viscosity for optimal performance.

The Yamaha Fazer 1000 typically requires about 600 to 650 ml of fork oil per leg, depending on the specific model year and fork configuration. It's essential to refer to the owner's manual for the exact specifications and recommended oil type. Proper oil level is crucial for optimal suspension performance, so ensure to check and adjust accordingly.

The 1973 Honda CB450 typically requires about 10.5 to 11.5 ounces of fork oil per fork leg, depending on the specific model and any modifications. It's important to use the correct viscosity oil, usually around 10W, for optimal performance. Always refer to the service manual for exact specifications and guidelines when servicing your forks.

The 2001 Honda Shadow 1100 typically requires about 11 ounces (approximately 325 mL) of fork oil per side. It's important to use the correct viscosity, which is usually 10W for this model. Always check your owner's manual or service manual for specific details and specifications before proceeding.

To change the fork oil in a 1993 FXR Harley Davidson, first, secure the motorcycle on a stable lift to prevent it from tipping. Remove the front wheel and brake calipers, then loosen the top fork caps and remove them. Drain the old oil by inverting the forks and allowing it to flow out, then refill with the recommended type and amount of fork oil through the top, reassemble the caps, and put everything back together. Be sure to check for leaks and proper functioning before the ride.

For a 1992 Suzuki RM 250, the recommended amount of fork oil is typically around 400 to 450 ml per leg, depending on the specific fork model and desired oil level. It's important to check the owner's manual or service manual for precise specifications, as variations may exist. Always ensure to use the correct viscosity fork oil for optimal performance.

The fork oil capacity for a 1995 Honda VT1100C2 (Shadow Ace) is typically around 10-12 ounces per leg, depending on whether you're working with the standard or any modifications. It's important to check the service manual for your specific model to confirm the exact amount and oil type recommended. Always ensure to use the correct viscosity oil as specified for optimal performance.