Where is the transmission vacuum modulator on a 94 Mazda B 4000?
on the passenger side by the 2 servos, theres a heat shield plate over it and a vacuum hose running to it..if your getting tranny fluid up and into you engine ,,thats why,,but go the easy route, take your seat out cut a hole in floor.. the mirror way is no fun
What does p0715 mean on your mazda6?
Trouble code P0715 means:Input/turbine speed sensor circuit malfunction
The Mazda Motor Corporation, based in Japan.
The vast majority of the cars are built in Japan, so the answer could also be "Japanese People."
However the company has assembly plants located world wide, so one could also say "People and robots" build Mazda cars.
Mazda were originally called Toyo Cork Kygoro Co., then they changed to Toyo Kygoro in 1927 and then again in 1984 to Mazda, a name that they had used in every car model anyway.
Is there a video on 2003 Mazda protege5 oil filter removal?
there no video that ive seen, but its simple to find but to remove will depend on who has replaced it before.
-jack up the car and look for the drain plug on the passanger side of the car
-look straight up from that the oil filter is right there
Now, depending on how tight or even if the last person oiled up the gasket of the filter will depend on how simple it will be to remove it. Theres not much space to work in.
What size wiper blade on 2004 Mazda 6?
The 2004 Mazda 6 wiper blade sizes are 22" drivers side, 18" passenger side and a 20" rear wiper (hatchback) or a special 12" rear wiper blade (wagon) that's difficult to find in stores. See Sources and Related Links below for more information. Since there are over 22 different wiper arm attachments, do not buy wipers just by length only. Be sure to lookup exact wiper blade part numbers by vehicle make, model and year for the brand wiper you decide to purchase. This ensures correct length AND correct attachment.
What size speakers are in the 1999 Mazda Protege?
6x8 in the front depth 3.75
6x9 in the rear depth 4
What size wiper blades on 2007 Mazda 3?
21" Driver's Side, 19" Passenger Side, 14" Rear Window. See sources and related links below. Note that the rear wiper is a special mount. Always lookup exact part numbers by make, model and year.
How do you change a Mazda cx-7 headlight bulb?
It's a real pain the the rear... The manual says that the front bumper should be removed, but there's an easier way.... Turn the steering wheel to the far left or right to allow you room to work and remove the retaining clips for the plastic front fender well liner, pull back the plastic fender well liner and reach up to access the rear of the headlight. Pull the rubber boot off, carefully unclip the bulb and detach the headlight wire and pull the bulb out. Reverse the steps to install the bulbs.
The bulbs for the LOW BEAM are H7 High beams are 9005.
How do you remove steering wheel on 1999 Mazda B3000 pick - up?
Okay a Mazda and a Ford pick up are basically the same thing so first check the top part of the cover directly behind the steering wheel. If there is a small removable cover there, remove it and look inside. You should see a what appears to be a small bolt going straight down. As you turn that bolt it will gradually force the steering wheel off. If you don't have the small cover, there are four small bolts on the back side of the steering wheel to remove the air bag. Once the airbag is off you will see a large nut that has to be removed. Once removed you will need a steering wheel puller to force it off.
How do you disable an anti-theft system on a 1999 Mazda B4000?
If you own the vehicle and want the anti-theft system disabled, take the car to the dealer or other reputable shop. They might disable it for you or tell you how yoi can disable it.
How do you replace the front turn bulb on Mazda cx 7?
You need to remove the wheel well to do it. Its a pain!
What does this dashboard symbol mean yellow car with lines coming out of the back on a Mazda rx8?
This is the Traction Control System indicator. It illuminates when it is in use. It can also be turned off in which case it would illumiate with TCS or DSC OFF indicated.
Where is the oil pressure switch located on a 86 Mazda b2000?
usually next to the blinker fluid reservoir unless its turbo then its under the flux compasitor relay unit thingy
How many hours to replace oil pan gasket 20004 v6 Mazda tribute?
Like with anything... time varies depending on your availability of the proper tools. I just replaced my wifes and had some pressing issues. You will have to remove part of the exhaust. There should be three different connections that you will need to remove. One being at the front of the car directly in front of the oil pan, the next at the Y flange further back on the exhaust and the last being at the flange where the exhaust is flexible. The nuts can be rusted on or tough to get off because they were subjected to high heats. Would suggest only using 6-point sockets on these nuts - otherwise you can round them off. If you round one off there is are special sockets that you can get at any auto parts store to help you get them off. If everything goes smoothly... 4 hours. A rough time and you could be looking at 7-8 hours. Hope this helped!
In 2000 Mazda started their very popular Zoom-Zoom ad campaing. It has been part of all of their marketing capaign including TV, radio and print.
What code p0401 means on Mazda 95?
Trouble code P0401 means:Exhaust gas recirculation flow insufficient detected
What kind of oil filter fits a Mazda 323 1.6l?
FRAM PH4998 or C-1809 (I don't remember the brand of thisone, white box with a red line)