0
Metric System
The metric system is an international basis of measurement based on a decimal system. It uses standard base units to name larger and smaller units.
2,771 Questions
How many decka meters are in a meter?
There are 10 decameters in a meter. A decameter is a unit of length in the metric system equal to 10 meters.
In a word, stubbornness. On an official level, the United States converted to SI units in the late 18th century, and since 1959, by law, an inch is exactly 25.4 millimeters. In the late 1970's, President Jimmy Carter tried to push the country to adopt SI units in everyday life, but the backlash against conversion, most especially the backlash against the detailsof conversion, was exploited by President Ronald Reagan, who rolled back all of Carter's metrification initiatives. Those meters and liters and key-low-grams were just unamerican.
Instead of teaching that an inch is about 2½ cm and a liter is a little more than a quart, schools taught that an inch is 2.54 cm and a liter is 33.814 fluid ounces.
Also, apparently it is very important for a mile to be exactly divisible by eleven (480 feet). ANOTHER VIEWPOINT: I think it is fundamentally an 'emotive/cultural' issue with them.History is that early Amercans emanated primarily from Britain as they continued to use the Brit. System. Changing to Metrication is a very major task because it affects so many businesses in a way that costs them a lot of money to make the change . In Australia the plan to change to Metric was worked on for several years before they started to force the community to start using it. It was a brilliant plan and it worked perfectly with no serious problems or consequences whatever. The key part of the plan was to change over 1 unit at a time over a period of about 10 years (I think it was 10) the first change was MONEY,then came LENGTH , then came WEIGHT then things like volume ,density, pressure, etc followed slowly. Land area was the last of all. Americans are an innovative people and they like to lead the rest of the world. They are a very proud nation and do not take easily to being told what to do by other nations . They do not like to copy. They like to lead. They, as a nation, have a tendency to like to be DIFFERENT. they even changed the magnitude of the British gallon, pint, and ounce. They introduced their own standard SCREW THREADS.they have a thread known as SAE, course and fine. These threads were used in industry and especially in Automobiles until at least the 1960's as I recall. When the rest of the world went metric, the American Auto. Industry followed suit, and started putting metric screws into car parts. My private view of USA is that they would feel humiliated if they were told to start using the system of measurement used by nations whom they think are inferior to USA. I also think that there would be powerful protests from a large percentage of proud Americans, if the nations leaders tried to force Metrication upon their nation. Let's be honest about this . Most people regardless of their origins, dislike change of any sort. We are moved out of our comfort zone when we are forced to deal with a major change of some kind or other.
What is the standard SI unit for measuring the mass of the liquid in the breaker?
The standard SI unit for measuring mass is the kilogram (kg).
What is 10.5 grams converted to kilograms?
10.5 grams is equal to 0.01 kilograms. To convert grams to kilograms, you divide the number of grams by 1000.
How many grams are in 35.0 kilograms?
Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). These are the denominations you need to list when converting metric units. Grams are three places to the right of kilograms. So you have to move the decimal place three times to the right (same as multiplying by 1000). You will get 350 kg = 350,000 g.
What is the standard unit of capacity in the metric system?
Who came up with the metric system in 1790?
The year presupposed by the question is not really correct.
During the early years of the French Revolution, the leaders of the French revolutionary Assemblée Constituante decided that rather than standardising the size of the existing units, they would introduce a completely new system based on the principles of logic and natural phenomena.
Initially France attempted to work with other countries towards the adoption of a common set of units of measure. Among the supporters of such an international system of units was Thomas Jefferson who, in 1790, presented a document Plan for Establishing Uniformity in the Coinage, Weights, and Measures of the United States to congress in which he advocated a decimal system that used traditional names for units (such as ten inches per foot). The report was considered but not adopted by Congress. There was little support from other countries.
Then, France started the ball rolling by passing the law of 18 Germinal, Year III (7 April 1795) which defined five units of measure (including metre, litre and gram). France officially adopted the metric system on 10 December 1799 with conversion being mandatory first in Paris and then across the provinces.
2 US quarts = 1892.71 ml
2 Imperial quarts = 2273.05 ml
What do you use to measure speed in the metric system?
You use exactly the same instruments to measure speed in the metric system as you use in any other system. For example, a speedometer, or a distance measuring device and a stopwatch.
The difference is that these devices are calibrated in metric units, instead of old-fashioned units.
What is the prefix for the 10000 's place in the metric system?
There is none but sometimes you may find "myriad".
The SI system discourages all prefixes that are not thousand multipliers or dividers. However certain prefixes are so historically entrenched that they will not vanish soon. Some examples of 'unsupported' prefixes are: centimeter (hundredth) decimeter (tenth) decathelon (ten) hectoliter (hundred)
How many inches in 128 cubic feet?
None.
An inch is a measure of length or distance in 1-dimensional space while a cubic foot is a measure of volume in 3-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
What is the fundamental until of temperature in the metric system?
The kelvin.
a change of one (degree) kelvin is the same as a change of one degree Celsius (one hundredth of the difference between the freezing and boiling points of water at Standard pressure.
What are the metric prefix's and their multipliers of the base unit from kilo to milli?
SI prefixes, also known as a metric prefixes, are names or associated symbols that precedes a unit of measure or its symbol to form decimal multiples or submultiples. SI prefixes are used to reduce the quantity of zeroes in numerical equivalencies. For measuring length (meter), volume (liter), or mass (gram) prefixes are all the same. Femto (f) 10-15 One Quadrillionth
Pico (p) 10-12 One Trillionth
Nano (n) 10-9 One Billionth
Micro (µ) 10-6 One Millionth (greek letter 'mu')
Milli (m) 10-3 One Thousandth
Centi (c) 0.01 One Hundredth
Deci (d) 0.1 One Tenth
one = initial value
deka (dk) = 10 Ten
hecto (h) = 100 Hundred
Kilo (k) 103 One Thousand
Mega (M) 106 One Million
Giga (G) 109 One Billion
Tera (T) 1012 One Trillion
Peta (P) 1015 One Quadrillion
How many meters in one side of 3334 square meter area?
Each side will be sqrt(3334) metres = 57.74 metres (approx).
What advantage does the metric measurements have over the English system of measuring?
Mainly that it is a universal standard. Most countries in the world use it - and it's easier if different countries use the same standards.
Another major advantage of the metric system is that it is much easier to remember how many of a smaller unit make up a larger unit, since it's always a multiple of ten. In the English system, 12 inches = 1 foot, 3 feet = 1 yard, and 1,760 yards = 1 mile. In the metric system, 10 mm = 1 cm, 100 cm = 1 m, and 1,000 m = 1 km.
Is gram used to measure the temperature in the metric system?
No, grams are unit of mass, not temperature.
Temperature is measured in °C (degrees celsius) or for scientific work in 'K'
K = °C + 273.15
What in the metric system is ten times smaller or ten times bigger?
In the metric system, each measurement is ten times smaller or larger than the previous or next measurement.
For example, a millimeter is ten times smaller than a centimeter. A centimeter is ten times smaller than a decimeter, and so on. This chart may be helpful
The column on the far left lists the measurements in order from largest to smallest, top to bottom. The three columns on the right list the name of the measurement and the abbreviation.
How big is a shoe box using the metric system?
A standard shoe box measures approximately 33 cm (length) x 17 cm (width) x 11 cm (height) in the metric system. Keep in mind that exact dimensions may vary slightly depending on the brand and style of the shoe box.
How do you convert 0.00378 kilogram to g?
Oh honey, it's simple math. Just move that decimal three places to the right because there are 1000 grams in a kilogram. So, 0.00378 kilogram is 3.78 grams. Easy peasy lemon squeezy!
What do most modern scientists use as a version of the metric system?
Most modern scientists use the International System of Units (SI), which is the modern form of the metric system. It is based on seven base units, such as the meter for length, kilogram for mass, and second for time, and provides a standardized way of measuring physical quantities.
A metre is a measure of length or distance in 1-dimensional space while a cent is a measure of area in 2-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid without some addition information.
How many meters in 14ft by 8ft?
To convert feet to meters, you can use the conversion factor of 1 foot being approximately 0.3048 meters. So, to find the area of a 14ft by 8ft room, you would multiply the lengths together to get the area in square feet, and then convert that square footage to square meters by multiplying by the conversion factor squared.
How many inches in a gallon of diesel fuel?
None.
An inch is a measure of length or distance in 1-dimensional space while a gallon is a measure of volume in 3-dimensional space. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid.
