Metric System

There are 20 linear meters in a five-meter by five-meter area. This is calculated by adding the perimeter lengths of the square, which is 5+5+5+5 = 20 linear meters.

10 times 49 is equal to 490.

Americans generally use inches, feet, yards, and miles as measurements of distance. Measurements based on meters and kilograms, more commonly known as the metric system is less commonly used.

To determine the square meters in 750 lineal meters, we need the width of the area. If you provide the width in meters, we can calculate the square meters by multiplying the width by the length (750 meters).

Mass is always measured in kilograms.

gram, milligram, microgram are just abbreviations for 0.001kg, 0.000 001kg, and 0.000 000 001kg; the measurement is still in kilograms it's just being expressed as afraction of a kilogram.

There are two primary metric units that can account for the volume of cubic liter (l). 10000000 cubic milliliters equals 1-L. 100-centiliters also equals 1-L.

75 feet = 22.86 metres.

In the Indian metric system, a barrel contains 159 liters.

The perimeter of a rectangular office is calculated by adding all four sides together. For a rectangle with sides of 25 meters and 45 meters, the perimeter would be 2(25) + 2(45) = 140 meters.

5 feet 4 inches = 162.56 centimeters.

There can be no equivalence.

An inch is a measure of linear displacement while a degree is a measure of angular displacement. The two measure different things and, according to basic principles of dimensional analysis, any attempt at conversion from one to the other is a fundamentally flawed procedure.

To calculate the weight of a brass square bar, you would first determine its volume by multiplying the length, width, and height of the bar. Then, multiply the volume by the density of brass (around 0.310 lb/in³ or 8.55 g/cm³) to obtain the weight in the desired units.

The units of length on a ruler are typically in inches and centimeters. Each inch is divided into smaller units, such as eighths or sixteenths, while centimeters are divided into smaller units called millimeters.

One Quadrillion metres is 1 x 1015metres, 1 petametre.

One metre is 0.000 62 miles'

10 petametres are 621 370 000 000 miles.

The two most common systems of units are cgs and SI systems

A millimeter on a non-metric ruler is the smallest unit of measurement typically marked on the ruler. It is equal to one-thousandth of a meter or approximately 0.03937 of an inch. It allows for more precise measurements than larger units like centimeters or inches.

A yocometre isn't an SI unit.

A yottamatre is 1 x 1024m, or 1 000 000 000 000 000 000 000 000 metres.

A yoctometre is 1 x 10-24m, or 0.000 000 000 000 000 000 000 001 metres.

It is much easier and faster to use as it is based on 10. The English system or standard system is based on many diffrent numbers. Such as 12(in) or 16 (oz) or 3ft. (yard) I hope this makes some sense! :)

1 foot = 12 inches

2 foot = 24 inches

3 foot = 36 inches

.

.

14 foot = 168 inches

.

.

140 foot = 1,680 inches

There are 1609.344 meters in one mile. Therefore to convert meters to miles, value in meters has to be divided by amount of meters in one mile:

405 meters = [meters] / 1609.344 = 405 / 1609.344 = 0.2517 miles

Units such as the meter, kilogram, liter, and Celsius are part of both the United States customary system and the metric system.

Not quite. Larger or smaller units are created by adding prefixes for different powers of 10 - not only 100.

There isn't really a kilolitre.

The unit for volume in the SI is the cubic metre. The normal prefixes get a little confused because of the cubing.

One cubic metre equals 1 000 litres. So if a kilolitre is a thousand litres, it is one cubic metre.