Remote Control Devices

I know the 37 series was sold in 69 (I have a 3719). The speakers and turntable usually have date codes. If you pull out the turntable (unhook cables on bottom, unlock lock tabs on top and turn 90 degrees), there should be a “REF” code on the bottom. First 2 digits is the year.

how to program a universal rca remote to a dtv craig converter box

Try 3162

7489

Replacements for Philips remote controls can be bought at several places, both online and at physical locations. Replacement Philips remotes can be bought at retailers such as Best Buy, Target, Sears and Staples. You can also order replacements at the Philips website or give them a call where a helpful customer service representative will assist you. Replacements can be bought on eBay and Amazon, too.

look up "how helicopters work", it shows you basically every thing. the only difference is that 1 . its a toy 2. the main blades do not adjust to turn toy helicopters, the motors tail end slows down to turn the toy helicopter allowing only left/right turning

code for jvc tv from a rca converter box control

It appears the TCL 55" uses RCA codes. Give RCA codes a try because they worked for me -- in my case, code 333 worked for my Avex R6 (URC-RC) Universal remote control.

Maybe the other TCL TVs use the same RCA codes.

remotes that are built for cable boxes like the cox remote is a universal remote control. although this is a universal remote, it normally will only work with cox digital converter cable boxes. therefore if the digital converter box that you want to control is from cox or motorola (or similar supported affiliate of cox) then pressing the CABLE button will control that said digital converter box. The AUX button will normally not control another digital cable box, because the manufacturer figures that the only converter STB that you will be using is theirs. thus, the CABLE button is only set for their STB. Normally to control weird or unpopular digital converter boxes - universal remotes are recommended. there are many brands, but make sure you find a learning universal remote. so in case the digital converter box code is not in the universal remote (like in the cox universal remote) then you can program it in yourself - hence the term "learning remote"

i picked up a ton of these last year for christmas for everyone in my family because they were dirt cheap and most ppl watch tv. so a universal learning remote for everyone was convenient & cost efficient for the state of the economy last year. i posted a link of where i got mine from, but there are many on the market. find what you like & purchase it, but make sure its a learning universal remote.

The FCC expressly prohibits the use or modification to allow use of any other remote for converter boxes as part of a provision by the cable and satellite companies included in the law. Universal remote capability amounts to unfair competition. Hacking the converter boxes by using a remote not included with the device is prohibited by law.

First find the manufacture or brand of your remote, then go online and find the manufacture and request owners manual for your remote. Second just do a search on yahoo, or Answer.com. Enter a question like this. How do i program a (all in one) remote? You should turn u plenty of answers. All in One is just a brand of remote. Be sure to ask about your specific remote. For instance emerson, or ge, or lg, or etc.

use magnavox code 1053

Look for the menu button on the manual control pushbuttons.

Use 0056, same as LG. Worked for me with a 32" LCD HCT TV

Use 19 for TV power on/ off with other vendor's programmable remote.

Contact Lowes directly for help with resetting the fan remote code.

This thread explains it all.....

http://www.redflagdeals.com/forums/showthread.php?t=114405

0154, 0156, and 0060 is what it says in http://www.hifi-remote.com/ofa/codes-tv.shtml#tv what I need to know is how to get that model to accept the code.

It is called recording but not every tv does it, some have recording capabilities already built in, if not then you will need a separate recording box, many are cheap now and will cost around £30 - £40.

Vizio soundbars (and soundbars) are not pre-programmed into URC remotes. You will have to use the head-to-head learning function of the WR7 as outlined in the manual on page 16.

Go to Carrier documentation site: http://www.residential.carrier.com/apps/finddocs/form.jsp?b=c You will need to know the model number of your A/C unit

Each code in the RCR3273 remote control is intended to work with a specific TV, VCR, DVD, Satellite, Cable, or DVR box. TV codes start with 1 and are intended to work with the TV button, Satellite/Cable Box codes start with 5 and are intended to work with the SAT/CB button. All other codes work with the DVD/VCR button.

If you have the code, press the button at the top of the remote that corresponds to your device type (TV, Satellite/Cable, or DVD/VCR/DVR) and hold it for three seconds. The light should stay on. Continue to press this button throughout the programming process.

Enter the code for your device. Remember, TV codes start with 1, Satellite/Cable box codes start with 5. Enter all 4 digits in the number. The light on the remove should turn off when you press the first button. If the LED blinks 4 times at any point during code entry, you entered an invalid code. Once you have entered the last digit , the light on the remote should turn back on.

Remember to check your work by going through the full complement of remote functions.

I searched the internet looking for a way to program my comcast remote to work on my plain old 32" Sylvania TV. Nothing worked. The codes given by comcast didn't work. I read on another web site (askdave) where people with new Sony big screens were having the same problem. Their problem was solved by entering a 1 in front of the four digit number on comcast's list for their TV. I tried this for my Sylvania and the third code in the list worked with the 1 in front of it. Hope this helps.