Volume

sand weighs 100 pounds per cubic feet

2000 pounds is one ton

2000/100 = 20 cubic feet

1 meter = 3.28 feet

1 cu meter = 3.28 x 3.28 x 3.28 = 35.31 cu ft

20 cubic feet = 20/35.31 = 0.566 cubic meters

The number of scaffolding pipes required would depend on the dimensions of each pipe and the design of the scaffolding structure. To calculate the exact number of pipes needed to construct 1000 cubic meters of scaffolding, you would need to know the length, width, and height of the scaffolding, as well as the spacing and configuration of the pipes.

1950 mL is greater than 1.95 L. To compare the two, convert 1.95 L to milliliters: 1.95 L is equivalent to 1.95 x 1000 = 1950 mL. Therefore, 1950 mL is equal to 1950 mL, making it greater than 1.95 L.

To find the square footage from cubic feet, you need to know the height of the space. If the height is 1 foot, then the square footage would also be 386 square feet. If the height is different, you would need that information to calculate the square footage.

On average, 1 gallon of rice weighs approximately 7.5 pounds.

1 cubic meter of bio-gas is equivalent to 1000 liters.

The amount of diesel required to generate 1 megawatt of power depends on the efficiency of the diesel generator. On average, it takes about 0.25 to 0.30 gallons of diesel per hour to produce 1 kilowatt of electricity. Therefore, to produce 1 megawatt (1000 kilowatts) of power for an hour, it would require around 250-300 gallons of diesel.

There are approximately 0.59 liters in 20 fluid ounces. To calculate the cost per liter, you first need to find the total cost, which is $2.00. Then, divide the cost by the volume in liters to get the cost per liter. The cost per liter in this case would be approximately $3.39.

The number of miles you can drive on 16 gallons of gas depends on your vehicle's fuel efficiency. If your car gets an average of 25 miles per gallon, you could drive about 400 miles on 16 gallons of gas.

This depends on density of the contents of the tank. For example, if it were to be water the tank would measure 1x1x1 meter.

However, if you were talking about feathers......

water is in the tank

1 cup = 0.25 quarts

64 cups x .25 = 16 quarts

It depends on the density of the shampoo.

With water, 1 ml = 1 gram, but I would imagine that shampoo is denser than water. The only way to know for sure would be to know the mass or density of the shampoo directly.

100

This really depends on the density of the juice. Density is measured in kg/l, which can also be written as g/ml.

If we assume a density for orange juice of 1.25kg/l, then one litre weighs 1.25kg, or 1250g.

The cost of 75 gallons of gas will vary depending on the current price per gallon at the gas station. To calculate the total cost, you would need to multiply the number of gallons (75) by the price per gallon.

yes, but you need to know the density of the substance you are converting

Depends of the type of oil you are referring to. Crude oil, olive oil, peanut oil, etc.

There are 256 fluid ounces in 2 gallons of paint.

Remember K H D | d c m (kilo, hecto, deka, (liter, meter, gram), deci, centi, milli). Liters are three places to the left of milliliters. So you have to move the decimal place three times to the left. You will get 1 mL = .001 L.

It depends on how big the piece of corn is.

The number of cubic meters in a metric ton depends on the density of the material. To convert metric tons to cubic meters, you would need to know the density of the material in question. The formula to calculate this is volume = mass / density.

There is no equivalence.

A cubic foot is a measure of volume while a square foot is a measure of area. The two measure different things and, according to basic principles of dimensional analysis, conversion from one to the other is not valid without some addition information.

A cubic foot of soil is a unit of volume that represents a cube with sides that are each 1 foot long. It is commonly used to measure the amount of soil needed for gardening, landscaping, or construction projects. On average, a cubic foot of soil weighs around 75-100 pounds, depending on its composition and moisture content.

An easy way to measure how many fluid ounces equal 1 liter is to fill a 1 liter beaker with water and then pour the water out of that beaker and into another beaker that is graduated in fluid ounces. Some large measuring cups are graduated in liters and milliliters as well as fluid ounces, so the conversion can be read directly from the water level.