Volume

There are 0.575 liters in 575 mL. This is because 1 liter is equal to 1000 mL, so to convert from milliliters to liters, you divide by 1000.

One drachm (dram) is equivalent to one-eighth of a fluid ounce! :)

On average, 1 gallon of water would convert to roughly 0.133 cubic feet of snow if the snow's density is around 20 pounds per cubic foot. However, the exact conversion can vary based on factors such as the snow's density, moisture content, and temperature.

38.61 liters. U.S. gallons are different from imperial gallons. 1 Imperial gallon is equal to 4.54609188 litres and 1 US gallon is equal to 3.78541178 litres. Liters on the other hand are the same everywhere. One liter equals 0.26 U.S. gallon or 0.219 Imperial gallon.

A millibar is a unit of pressure. Specifically, one thousandth of a bar. A gallon is a unit of volume. The two cannot be converted.

8.62 liters is approximately equal to 2.27 gallons.

To calculate the volume of water in a pipe, first convert the diameter to feet (28 inches = 2.33 feet). Then use the formula for the volume of a cylinder (V = πr^2h) where r = radius (half the diameter) and h = height. For a 2.33-foot diameter pipe and 1 foot height, the volume is roughly 17.19 gallons of water per foot.

9.87670935 ounces

6 US pints is 2.839 litres.

The possibble answer is 30

A graduated cylinder is commonly used to measure liquid volume, while a measuring cup is typically used for measuring dry ingredients like flour or sugar. Both can provide accurate volume measurements depending on the substance being measured.

One fifth of 30 gallons of water is 6 gallons (30 divided by 5).

Approximately 5 cans of 16 oz beans make 4.5 liters.

It really depends on how much you are measuring. Like over 100ml and I'd stick to a large graduated cylinder. Under 1 ml (possibly up to 5ml even) and you could keep adjusting a micropipette until all the sample is just taken up for an estimate. 5-100, you could use a graduated cylinder for an estimate and calibrate the graduated cylinder against a burette

Google knows!

http://www.google.com/search?q=30cc+to+tablespoon&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:en-US:official&client=firefox-a

There are 128 fluid ounces in 1 gallon, and there are 8 fluid ounces in 1 cup.

Conversion from Fahrenheit to Celsius is done in three steps:

1. Subtract 32 from value in degrees Fahrenheit.

2. Multiply result of step 1 by 5.

3. Divide result of step 2 by 9.

Conversion formula: [°C] = ([°F] - 32) * 5 / 9 = (95 - 32) * 5 / 9 = 35 °C

The amount of liters needed to drive 4.4 km depends on the vehicle's fuel efficiency, which is usually measured in liters per 100 km. If you know the fuel efficiency of your vehicle, you can calculate the liters needed by dividing the distance by 100 and then multiplying by the fuel efficiency.

There is 28.35 grams in one ounce.

The formula to convert 5.5 oz to grams is:5.5 oz*

28.34952313 g

1 oz

=

155.9223772 g

1.5 Imperial gallons = 240 Imperial fluid ounces 1.5 US gallons = 192 US fluid ounces

4.25L equates to 4250cc

1 tablespoon of water is equal to 15 ml.

There are approximately 113.6 liters in 30 US gallons.

One kiloliter is 1,000 liters. One hectoliter is 100 liters. One decaliter is 10 liters. One deciliter is .1 liters. One centiliter is .01 liters. One milliliter is .001 liters.

Mr. Wampole?