0
A Cisco serial cable, often referred to as a console cable, is a type of communication cable used to connect a computer or terminal to the console port of a Cisco networking device, such as a router or switch. It typically features an RJ-45 connector on one end and a DB-9 or USB connector on the other, facilitating direct access for configuration and management. This cable is essential for initial device setup, troubleshooting, and monitoring, providing a command-line interface for administrators.
What else can I help you with?
What is a Cisco Cab-v35mt?
It's a cable used to connect from a Cisco router's DB60 serial port to a telecommunication company's equipment which provides you with a data link.
What cable would you use to connect two Cisco 2600 series routers?
To connect two Cisco 2600 series routers directly, you would typically use a crossover Ethernet cable if they are connected through their Ethernet interfaces. If connecting through serial interfaces, a serial cable (such as a DTE to DCE cable) would be appropriate. Ensure that the correct interface types are used for the connection type you are employing.
What are some product features of the Cisco Can V35MT?
The Cisco V35MT is a data transfer cable that features a 34 pin male plug on one end followed by a 26 pin male plug on the other side. It is a 10 foot long serial cable that is compatible with the Cisco WAN Interface Card 2600 series.
What are the vizio universal remote codes for a cisco 8742hdc cable box?
What are the possible universal remote codes for a Cisco 4640 cable box
Where would it be possible to obtain a Cisco router cable?
It would be possible to obtain a Cisco router cable from various different stores and outlet stores that sell cables and other equipment for internet connections such as the Cisco router cable in particular.
Where is the ip address on a cisco switch for telnet?
The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.The Cisco switches I have seen don't have an IP address by default. You have to connect to the switch with a console cable - one that connects to the console port on the switch, and to the serial port on the computer - and do some initial configuration, including the IP address.
You've just received a new Cisco router for your data center and it came with a roll over cable What can you do with this cable?
make a connection from the router's console port to your laptop's serial port and configure the router from your laptop.
Which cable diagram displays the end to end pinout for a crossover cable used with Cisco devices?
Cable C
Definition of console cable?
A serial cable used to attach to a piece of computer equipment that does not have normal input and outputs e.g. keyboard and monitor. You use another computer to attach to the first via the serial port and cable and use a communications program to use the first computer's operating system. Medium to upper level Cisco and HP routers all have a console port for serial access.
What type of network cable is used between a terminal and a console port?
1. Its a rollover cable. 2. I'm not doing all your cisco questions. 1. Its a rollover cable. 2. I'm not doing all your cisco questions.
Which cable use between PC to Console port of Router?
A rollover cable with a RJ-45 connector will plug into a console port on a Cisco device, the other end can be a DB-9 connector or another RJ-45 that can plug into an adapter.
What type of cable is required to connect a host to a Cisco switch to initialize the configuration?
straight-through cable
