No, they cannot be connected. There is no glue on the market at the present time that can glue PVC & ABS together. It's difficult, as after one tries to glue it it gives the impression of being solid, but under pressure it will fail.
Also, keep in mind that some Plumbing codes do not allow ABS pipe to be used.
The different types of PVC pipe couplers available for connecting PVC pipes include slip couplings, threaded couplings, compression couplings, and solvent weld couplings.
To effectively connect a PVC pipe to a metal pipe, you can use a PVC-to-metal transition fitting. These fittings are specifically designed to join PVC and metal pipes securely. Make sure to clean and prepare the ends of both pipes before connecting them with the transition fitting. Follow the manufacturer's instructions for the specific fitting you are using to ensure a proper and leak-free connection.
To connect a gutter to a PVC pipe using a gutter to PVC adapter, first ensure the gutter and PVC pipe are clean and dry. Insert one end of the adapter into the gutter and the other end into the PVC pipe. Secure the connection with screws or adhesive as needed. Test the connection by running water through the gutter to ensure it flows smoothly into the PVC pipe.
If you are screwing in -- yes -- If not -- you do not use pipe dope
Use teflon tape with a little pipe dope. If you don't ever have to take apart again then you can use glue which you are calling cement
No, do not use glue. Use teflon tape or pipe dope on the threads. You should also make sure you always put the male PVC thread into the female metal thread. If you do it the other way you will tend to split the PVC fitting when you tighten the threads.
To connect a PVC pipe to a hose bib, you can use a PVC male adapter and a threaded hose bib. Simply screw the male adapter onto the hose bib and then glue the PVC pipe into the other end of the adapter using PVC cement. This will create a secure connection between the PVC pipe and the hose bib.
To effectively connect a galvanized pipe to PVC in a plumbing system, you can use a special fitting called a transition coupling. This coupling has one end that fits onto the galvanized pipe and the other end that fits onto the PVC pipe. Make sure to clean and prepare the ends of both pipes before connecting them with the transition coupling. This will create a secure and watertight connection between the two different types of pipes.
There are various types of fittings for connecting PVC pipes, including couplings, tees, elbows, and adapters. A PVC pipe elbow is a fitting that allows for a change in direction in plumbing installations. It is commonly used to create corners or bends in the piping system, helping to navigate around obstacles or create a more efficient layout.
To thread PVC pipe for plumbing purposes, you will need a pipe threader tool specifically designed for PVC. First, cut the PVC pipe to the desired length using a saw. Next, apply a lubricant to the end of the pipe to make threading easier. Insert the pipe into the threader and turn the handle clockwise to create the threads. Be sure to thread the pipe to the appropriate depth for a secure connection.
To connect PEX pipe to PVC effectively, use a PEX-to-PVC adapter fitting. This fitting allows for a secure and watertight connection between the two types of pipes. Make sure to follow the manufacturer's instructions for proper installation to ensure a reliable connection.
To properly install plumbing PVC pipe in your home, follow these steps: Measure and cut the PVC pipe to the desired length using a PVC cutter or hacksaw. Clean the ends of the pipe and fittings with PVC primer. Apply PVC cement to the cleaned ends and quickly join them together, twisting slightly to ensure a secure connection. Hold the pieces together for a few seconds to allow the cement to set. Allow the cement to cure for the recommended time before testing the connection for leaks.