0
What else can I help you with?
Where can one get help installing an F connector?
The F Connector is a coaxial RF connector used for television. You can get help installing an F connector online from the electrical section of the 'About' website.
Can you use an outdoor antenna with a flatscreen tv?
Yes, if it has an antenna input connector, (RF in).
How do you connect an RF out from a TV to a 3.5mm AV in jack on a portable projector to get picture and sound as I can't find such an adaptor anywhere?
There is no such adapter. A RF OUT does not give you VIDEO, connect your Video Cable to the VIDEO OUT connector on the TV set.
Your HDTV does not have an hmdi input how should you connect your cable box to the tv?
In descending order of quality, Component, S-Connector then Video. The RF or antenna input is the poorest.
Does a TV need a scart connection to use a Freeview set top box?
A Freeview set top box is a digital television receiver for use in the UK and delivers analogue signals at the output, for use with analogue televisions. All Freview receivers have video and audio outputs and normally these are found on a scart connector, the European multi-pin AV interface. If a television has no scart connector, it may be possible to use separate video and audio connectors, normally phono or RCA sockets. If the television doesn't have any kind of video input, then the only option is to use the RF connection. Not all Freview units have an RF output. If the Freeview signal must be taken into the television, then the receiver must have the output signal encoded to RF. Note that some Freeview receivers have an RF output but only to loop through the antenna signal and do not deliver the digital programme to the RF output. To be sure that it will work, you must ask the question "does the output of this receiver feed the RF output?" Remember that many salesmen will not know the answer to this, may say yes to get the sale and you get a unit that doesn't work. If that happens, you are fully entitled to return the unit and get a FULL refund as long as you asked the question before you bought it. (The Sale of Good Acts make complete provision for this). This isn't meant to be an attack on salesmen by the way but I have a big problem with poorly trained sales staff gicing out incorrect information!
What can you do if you hAVe a TV from 1994 and it doesn't hAVe AV ports?
A 1994 television will be a purely analog model and will need a set top box to receive digital broadcasts. While most set top boxes provide video and audio signals there are a few that will also output the same signal on an RF connector. This is the same connector that aerials use to deliver a signal to the television receiver. With an RF signal, the television can be tuned to the right frequency and display the output of the set top box. Because this is now not a common problem, it is vital that before purchasing a set top box, you ask the question: "Does it output the program content as an RF signal on the RF connector?" Some sales staff will understand the question and answer correctly. Sadly, a few might be tempted to give you the answer you want without knowing. If a set top box with an RF output proves difficult to get, it may possible to use an old VHS recorder. Even a VHS recorder that won't play tapes will work. Take the video and audio signal from the set top box into the line input or AV input of the video recorder. Select the line input on the recorder and the signal should appear on the RF output of the recorder. Tune the television to the channel that the recorder is on. Its not an elegant solution - but it is a solution.
Does a N64 have to have a RF modulator to use a RF switch?
Yes, a modulator is required if you use a RF cable to connect it to the TV.
Are TV RF signals analog rather than digital?
In the US and Europe they are almost all digital.
What is the difference between a RF cord and AV cord?
An RF cord plugs in the back of a tv and a AV plugs in the yellow in white oulet and RF cords are SNES and NES!!!!!!!!!!!!!!!!
What RF levels are commonly considered to be an indication of sufficient analog video level at the RF input of a TV set?
0 to -5
What are RF channels?
RF channels are specific frequencies within the radio frequency spectrum that are used to transmit data or signals wirelessly. In the context of television, RF channels are used to broadcast TV signals over the airwaves to be picked up by antennas. Each RF channel corresponds to a specific frequency for transmitting and receiving data.
How do you hook up a home theater system to an old TV and RF modulator?
The video out from whatever source you have will go into the RF modulator which then screws into the back of the old TV.
