0
What else can I help you with?
What VTP mode can only accept Vlan information and not change it?
Client
What must the network administrator do to remove Fast Ethernet port fa01 from VLAN 2 and assign it to VLAN 3?
To remove Fast Ethernet port fa01 from VLAN 2 and assign it to VLAN 3, the network administrator should first enter the interface configuration mode for the port by typing interface fa01. Then, the command switchport access vlan 3 should be executed to change the port's VLAN assignment. This action automatically removes the port from VLAN 2, as a port can only belong to one VLAN at a time in access mode. Finally, the changes can be saved with the write memory or copy running-config startup-config command.
What is mean of shutdown vlan 17?
The command "shutdown vlan 17" is used in network configuration to disable VLAN 17 on a network switch. When executed, it effectively prevents any traffic from being forwarded through this VLAN, rendering it inactive. This can be useful for network management purposes, such as troubleshooting or reconfiguring the VLAN. To reactivate the VLAN, the command "no shutdown vlan 17" would be used.
How do you connect computers on separate VLAN?
Since VLAN's cannot communicate with other VLAN's directly, I believe you would have to set up a router to do that. I would check out how to set up a bridge between two VLAN's.
Why should you reassign a port to another VLAN before removing the VLAN from the VLAN database?
Reassigning a port to another VLAN before removing the VLAN from the VLAN database ensures that there is no disruption in network connectivity for devices connected to that port. If a port is removed from a VLAN without reassignment, it may result in loss of access to the network for those devices, causing potential downtime and disruption. Additionally, this practice helps maintain network organization and prevents configuration errors that could arise from deleting a VLAN that still has active ports.
how are packets assigned to the VLAN?
VLAN: How are packets distributed with respect to the different classifications?
Why would packets from the router or hosts fail when trying to reach the switch management interfaces if the native VLAN were left in default?
The native VLAN is untagged. If the VLAN 99 traffic to the router is untagged (as it would be, because that is native on the switches), the router cannot interpret the data because there is no VLAN information in the header as expected. In turn, the router tags all VLAN 99 traffic outbound, and leaves VLAN 1 data untagged, so the switches are unable to correctly interpret either. VLAN traffic to the other VLANs should not be affected by the assignment of the native VLAN.
What is a function or characteristic of the native VLAN?
It is the VLAN that supports untagged traffic on an 802.1Q trunk
The network administrator needs to remove the east-hosts vlan and use the switch port from that vlan in one of the existing vlans what two commands should be used when completely removing vlan 2 from?
no vlan XXX copy run star
What is the difference between vlan and inter-vlan?
VLAN is a group of hosts with a common set of requirements that communicate as if they were attached to the same broadcast domain, regardless of their physical location. Inter VLAN is defined as two VLANS connected to each other and communicating.
What is pvid?
A Port VLAN ID (pvid) is a default VLAN ID that is assigned to an access port to designate the virtual LAN segment to which this port is connected. The pvid places the port into the set of ports that are connected under the designated VLAN ID. Also, if a trunk port has not been configured with any VLAN memberships, the virtual switch's Port VLAN ID (pvid) becomes the default VLAN ID for the ports connection.
Which type of VLAN would accommodate untagged traffic on a 802.1q trunk port?
native vlan
