Try to connect yellow into the green input while using red and white to the matching inputs. If this does not work, you may need a converter box sold about anywhere online RCA to digital/HDMi converter.
You can use RCA cables or coax. You will see on the back of your Dish receiver a TV out for either coax or the RCA cables out, then plug the cable into the input of your TV. Be sure to tune your TV to whatever input you choose to view dish satellite programming.
To connect an RCA cable to an XLR cable, you must solder links one and three from the XLR together, and connect those two wires to the end of the RCA component, along with the second wire. It is very useful to use a diagram to make sure you connect the correct cables.
a mini (1/8") cable can be a y-cable, particularly if it is used to connect a 1/8" stereo connector (like an iPod) to a RCA stereo cable. The 1/8" stereo plug must split (Y) to the left and right RCA in order to connect in stereo.
1.for video composite cable yellow use rca male to rca male video cable. or component (recommended if tv has this input) 3 pairs of rca male to rca male video called rgb cable. 2. for audio out use pair of rca male to rca male cable.
Typical coax cable uses a different standard than RCA. You will need to use a converter box.
No.
If your tv has RCA out, use that. If not, you could use an external digital cable tuner and connect that to your soundbar .
No. You would need a coaxial (preferably video) cable to connect a cable box to a VCR, unless your cable box has RCA outputs, which most don't.
There is quite a debate as to comparison between Phillips LCD televisions and Vizio televisions. A good forum to check out with varied opinions is http://www.tv-forums.com/forum/TV_Equipment_C4/LCD_TV_Forum_F41/Vizio_or_Philips_P40027/
A VGA to RCA cable allows you to connect components such as a laptop to a television. These two components are not necessarily built ready to connect so a VGA to RCA cable allows for the signal version without a converter.
It depends on what you want to connect to it. RCA - RCA or RCA - SCART or S-Video cable (not used that often any more)
you need vga to rca cable