answersLogoWhite

0

You cannot solder Steel BUT you can braze steel and copper and you can thread steel and then use a copper x female adapter Or finf a steel fitting and use a C x M adapter

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How do you stick copper to copper?

With fllux, solder and a torch. clean both surfaces with steel wool or sand paper, put a thin film of flux on each piece on the entire area that will be joined. Heat on one side and put the solder on the opposite side. When the copper get hot enough to melt the solder, the flame from the torch will draw the solder to it. That way you know there is solder in the whole joint.


Is solder an alloy of copper or iron?

It is an alloy of copper.


Where can you find copper colored solder?

Copper colored solder can be found at http://www.beadmeus.com/coppercolorsolder.aspx the flux is included in the soldering rod.


Which brazing rod do you use when brazing copper to brass?

You should use solder, not brazing. Brazing is used to join iron or steel products together.


What type of solder should be used for copper pipe?

For copper pipe, lead-free solder is recommended to ensure safe and effective connections.


Can you crimp solder copper pipes?

Sandcloth the end being soldered. Squish the end with pliers so it is tight. Put flux on the end and solder. Easier to buy a copper cap and solder that on!


How do you weld copper piping?

you solder or braze it


Can you solder a threaded copper fitting?

Yes


Can stainless steel be soldered?

You can solder stainless steel parts together, but you cannot use it as solder. You would need to use silver bearing solder. Also you need a torch, you will not be able to use a simple solder pen as it doesn't produce enough heat.


What is the compound symbol for solder?

The compound symbol for solder can vary depending on the specific composition. Common solder compounds include tin-lead solder (Sn-Pb) and lead-free solder such as tin-silver-copper (Sn-Ag-Cu) or tin-copper (Sn-Cu).


What would you use to solder a shut off valve on to a copper pipe?

What to use to solder a shut off valve


What is soldering gun used for?

It melts solder. Solder was originally a mix of lead and tin that was used to join copper to copper (pipes and wiring) It is in the shape of a pistol, but does not shoot anything.