normally digital watch can turn off alarm and hourly beeping. The best way is to find the guide on your user manual. If you don't have a user manual. Try to press 2 buttons at same time for a while.
To turn off the hourly chime on the AW21306W clock, locate the switch or button on the back or side of the clock labeled "Chime" or "Sound." Slide the switch to the "Off" position or press the button until you see a change in the indicator. If there are specific settings, refer to the user manual for detailed instructions. This should disable the hourly chime feature.
I have an ATHM4801 model and on that one you press and hold button 4 ('Reset' on the lower right), while holding button 4 press button 2 ('Mode' on the lower left). If all the days are visible when you press button 4 then the hourly chime is on. If the days are not displayed then the chime is off.
I have the AW21300W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)If you want the chime on, press button 4 and hold while you press button 2. When all the days show, the chime is on.
Ah, turning off the alarm and hourly chime on your US POLO ASSN US9058 watch is as easy as painting a happy little tree. Simply press the mode button until you reach the alarm or chime setting, then press the adjust button to turn them off. Remember, there are no mistakes, just happy little accidents in life.
Use the same procedures as for the ATHM4801 model listed below:press and hold button 4 ('Reset' on the lower right), while holding button 4press button 2 ('Mode' on the lower left).
Hello friends! I faced the same problem at first as I didn't know the options in the watch. To set the hourly chime in Sonata super fiber watch all you have to do is- Just press the mode option & go to alarm. Now press the start/stop button for once. This will set the hourly chime with the icon darkened besides the alarm symbol. Hope this would help you! Manish kumar E-mail : manu.budh@india.com
you press the mode button until you get to the alarm mode, then you press the start stop button repeatedly until the little CH symbol at the bottom of your watch face disappears, this will deactivate the hourly chime.
I have the AW21312W, which has 4 buttons:Light (Top left)Mode (Bottom Left)Start/Stop (Top Right)Lap/Reset (Bottom right)To turn the set alarm off, push buttons 3 and 4 at the same time, the alarm icon should appear or disappear To turn off the hourly chime, press button 4. While holding it down, press button 2 and the days of the week disappear. The chime is now off. If you want the chime, press button 4 and hold while you press button 2. When all the days show, the chime is on.On my digital watch you first need to press 2 until the alarm time is shown. There should be icons to show if the alarm is on and if it's chiming the hour. To change these hold down 3 then press 2 to switch through the different possibilities, ie just alarm on, just hour chime on, or both on or off.* On the AW60458W sport watch, turn off the hourly chime by staying in CLK (normal) mode, holding down the LAP/RESET button to display the alarm time, and pressing the MODE (left side) button. When the hourly chime is on, all 7 days of the week appear selected. Otherwise it is off. Pressing the MODE button toggles this function on and off.
Hit it with a hammer.
To deactivate the hourly chime on an NFL scoreboard clock, you typically need to access the scoreboard's control panel or software interface. Look for settings related to audio or alerts, and you should find an option to disable the hourly chime. If you're using a specific scoreboard model, consult the user manual for detailed instructions. If issues persist, contacting technical support for the scoreboard may be necessary.
Hold the mode button down until setting changes to alarm and starts flashing. Press the mode button again to switch to time. Use the SPL/Reset and ST/STOP buttons to change the time and switch between the seconds, minutes, hours, date, month, day. Press the mode button again to make it stop flashing. And your time should be set.
Hold down the reset button and then press the mode button to either turn the chime on or off. Indicator lights should go off/on around days of week.