To turn off the hourly chime on the AW21306W clock, locate the switch or button on the back or side of the clock labeled "Chime" or "Sound." Slide the switch to the "Off" position or press the button until you see a change in the indicator. If there are specific settings, refer to the user manual for detailed instructions. This should disable the hourly chime feature.
Hit it with a hammer.
I have the 750Li In i-drive go to settings/clock and de-select memo and you're done.
Do you mean the key in ignition chime?
Press the "ADJ" and "ST/STP" buttons simultaneously. This will allow you to turn on/off the hourly chime (indicated with a CH icon), as well as activate/deactivate the alarm mode.
Ah, turning off the alarm and hourly chime on your US POLO ASSN US9058 watch is as easy as painting a happy little tree. Simply press the mode button until you reach the alarm or chime setting, then press the adjust button to turn them off. Remember, there are no mistakes, just happy little accidents in life.
You cannot turn off the chimes on this clock
Well you should always wear a seatbelt but you can turn off the chime by simply grounding the wire lead at the seatbelt causing the electricity to flow through and the chime to turn off
normally digital watch can turn off alarm and hourly beeping. The best way is to find the guide on your user manual. If you don't have a user manual. Try to press 2 buttons at same time for a while.
Hold down the reset button and then press the mode button to either turn the chime on or off. Indicator lights should go off/on around days of week.
Put on your seat belt and buckle it up. The chime will then stop.
that chime is telling you that the door is open if you have owner manuel, you can find in manuel how to turn off the door open chime from working
To turn off the seat belt chime on a 2008 Toyota Tundra, you can follow these steps: Sit in the driver's seat with the door closed and turn the ignition to the "on" position without starting the engine. Buckle and unbuckle the seat belt three times, then turn the ignition off. This should disable the chime for that seat. If you want to re-enable it, repeat the process.