answersLogoWhite

0

It is basically the same as a regular pipe wrench except on the inside. It is sized for the pipe and has a toothed section that grabs when it is turned. You turn it with a wrench or socket. They will not take as much strain as a regular pipe wrench.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

You should use what kind of wrench on a plated or polished pipe?

A strap wrench Or an inside wrench


What are the best practices for using a PVC pipe wrench effectively?

To use a PVC pipe wrench effectively, make sure to choose the right size wrench for the pipe, position the wrench correctly on the pipe, and apply steady pressure while turning the wrench in the direction needed to loosen or tighten the pipe. Avoid over-tightening to prevent damage to the pipe.


How to use the word wrench in a sentence?

I tried to wrench the pipe out of the hole with all my might!


How do you remove the threading from the pipe if it broke off?

There is an internal pipe wrench that goes inside the pipe and expands as you turn it and it turns out the broken piece. You should be able to get the tool at a hardware store.


How do you remove a stuck slip nut from a plumbing pipe?

use a pair of channel locks, or a pipe wrench,


How do you get an internal pipe wrench to grab the nipple?

You insert the correct size wrench into the pipe and as you unscrew it, a cam grabs the inside and hopefully unscrews the nipple. It may break also. Most pipes are rusted too tight for an internal pipe wrench to loosen them. What you can do that takes a little time is insert a hacksaw blade in the nipple and cut a notch through the nipple. This relives the pressure on the nipple. Tap around the edge with a screwdriver or chisel and then try the wrench. For extremely rusty pipes, cut the nipple in 3 places and knock out the pieces.


What is the use of monkey wrench?

it is used to fix pipes or to install pipes eg.a plumber would use the monkey wrench to fix or install a pipe


Do plumbers use a wrench?

Yes, most plumbers use at least 3 pipe wrenches, (12", 18" and 24 " ) and a large crescent wrench.


On a irrigation system how would you remove a 1.5 inch nipple broken off at a valve?

try an "internal" pipe wrench, these can be purchased at mscdirect.com, they have a cam on them that grabs as its turned inside of a pipe.


What pipe wrench is best?

i think Ridgid 31005 8" Straight Pipe Wrench is best.


What size wrench do you use the replace egr vale from pipe on a 95 mercury mystique v6?

inch wide adjustable wrench


What is a pipe wrench used for?

A pipe wrench, or an adjustable wrench, is used for any job which requires being able to adjust the wrench after inserting it into a tight or confined space, such as when attaching pieces of pipe together near a wall.