0
What else can I help you with?
Where do you plug a rca phono into a 40 inch Samsung D5000 tv?
If you want an audio output from the TV to connect to a home theater receiver or other amplifier, you will have to use the optical digital audio output or Audio Return Channel through the HDMI connectors. Those are the only outputs on this TV.
How do you get sound from your ls 42pg20 tv to a a rca rtb10223 surround sound?
The TV set needs to have audio output connectors. If it has them connect the TV's outputs to RCA's inputs.
What is the output work of an analog television?
Types of output to an analoge television set are composite or S video for video and RCA / red and white audio.
What channel is the PS3 on?
For older TV sets that have RCA plugs and still need to go to a certain channel they were normally in the 97 to 99 channel area
How do you hook up a VCR and DVD recorder to a satellite receiver and TV?
Go out from the dish set-top box and into the vcr and then out from vcr into the tv. Most receivers have outputs that are RCA (Yellow/Red/White). On the back of your VCR, you should have inputs for RCA. Also have inputs on the back of the Television. There are two ways to go if it is a non-HD receiver: Coaxial and RCA ---- Take the cable output from the back of the receiver (it says "out to tv") and connect that to the input on the VCR. Then take another cable and attach it to the output on the VCR and connect that to the TV's input. This requires you to set the TV to either channel 3 or 4 depending on the setup on the VCR. ---- Take the RCA (Yellow/Red/White) from the receiver to the VCR inputs and plug them in. Hookup the VCR to the TV using the Coax or using the RCA output on the VCR. Note: this will require you to set the VCR to the TV/VCR setting in order to view the Video/Audio output. This would require either changing the channel (Coax output) or changing the TV's video input.
Can you connect a DVD without coaxial outlet to tv with coaxial connection?
you can buy a rf converter from radio shack or if you have a vcr you can run the rca cables to th e input on the vcr and output with coax.(make sure you turn the channel on the vcr to the video input channel
Is the Sony - Video / audio cable - Male 19 pin HDMI Type A to M RCA what i need to hook the Tv to home stereo?
That cable will work as long as your TV has an RCA output.
How Do VGA to RCA Cables Work?
To watch Internet TV on your home television from your computer, requires a vga to rca adapter. The VGA end of the adapter plugs into the VGA port of your computer. The RCA end of the adapter plugs into the RCA converter on your home television. The RCA converter carries the signal to the television. The RCA converter is needed to watch cable or satellite. The RCA cables consist of three cables. All three cables work together to deliver the picture, left channel audio and right channel audio. Newer model televisions have the ports on the back of the television. Older televisions have the ports located on the front. These popular coaxial cables are included when you purchase a new television.
Yes, it will convert the sounds, but NOT video. Use RCA Yellow Cable, male on both ends. Insert one end to the TV digital output and another to the Converter input. Use MALE RCA audio cables, RED&am?
Yes, it will convert the sounds, but NOT video. Use RCA Yellow Cable, male on both ends. Insert one end to the TV digital output and another to the Converter input. Use MALE RCA audio cables, RED&WHITE/BLACK, insert into Output on the Converter, use RCA Red&white/black cable from the TV-Ears and insert into Output of Converter (next to power cord). Produce super great sounds. Pranee
Can you connect tv to a projector?
If you TV has output connection, then you can get cables to connect your TV to your projector. For example I have a TV with RCA video and audio outputs, I use 3 RCA cables and then I connect them to my RCA inputs into my projector. My projector has a small speaker, so most of the time I just connect the video cable.
Can you connect logitech x-540 to a TV?
Yes, you can connect the Logitech X-540 speakers to a TV using an RCA audio output or a headphone jack on the TV. Use an RCA-to-3.5mm adapter or cable to connect the TV to the 3.5mm input on the X-540 control pod for audio output.
How do you connect my laptop to 10 year old Panasonic TV?
It would depend on what kind of outputs your laptop has and what kind of inputs your Television has. If you have a HDMI output on your computer, but only RCA inputs on your television you'd have to find a converter from HDMI to RCA.
