0
There are several choices, depending on the material you are connecting to and your preference's The newer 'shark-bite' fittings are a good, universal choice because you can go from copper to most any other material. With a 'shark-bite' type solution, the fitting is a compression fitting that slides onto the outside of the pipe & the seal is achieved with an O-ring; so therefore the water-pressure pressing against and expanding the O-ring achieves the seal. Otherwise, the Traditional transition from copper to another material is by using male/female fittings & simple threading them together. Of course w/copper you want to use brass or stainless or something that won't encourage corrosion due to dissimilar metals (which also violates code). -Bruce Davis Sr. Journeyman Plumber, Day & Nite Plumbing, Inc. Lynnwood, WA bruce@dayandnite.net.
What else can I help you with?
How can I transition from copper to PEX without soldering?
To transition from copper to PEX without soldering, you can use push-to-connect fittings or compression fittings. These fittings allow you to easily connect the PEX tubing to the existing copper pipes without the need for soldering. Simply cut the copper pipe, insert the PEX tubing into the fitting, and secure it in place according to the manufacturer's instructions. This method provides a quick and efficient way to make the transition without the use of a torch or solder.
How can I attach PEX tubing to copper pipes?
To attach PEX tubing to copper pipes, you can use a fitting called a PEX-to-copper adapter. This adapter allows you to connect the PEX tubing to the copper pipe securely using crimp or clamp fittings. Make sure to follow the manufacturer's instructions and use the appropriate tools for a proper and leak-free connection.
How can I disconnect push to connect fittings?
To disconnect push-to-connect fittings, you need to push in the release ring while simultaneously pulling the tubing out. This action will release the grip on the tubing and allow you to disconnect the fitting.
How can push to connect fittings be removed?
To remove push-to-connect fittings, you need to push in the release collar while pulling the tubing out of the fitting. This action will release the grip on the tubing, allowing you to remove the fitting easily.
What is the best way to connect PEX tubing to copper piping using a PEX to copper adapter?
The best way to connect PEX tubing to copper piping using a PEX to copper adapter is to first cut the PEX tubing to the desired length and then slide the PEX fitting onto the tubing. Next, use a crimping tool to secure the fitting onto the tubing. Finally, solder the copper adapter onto the copper piping and connect the PEX fitting to the copper adapter.
How can I connect PEX tubing to copper pipes?
To connect PEX tubing to copper pipes, you can use a fitting called a PEX-to-copper adapter. This adapter has a PEX side that can be crimped onto the PEX tubing and a copper side that can be soldered onto the copper pipe. This creates a secure and watertight connection between the two types of pipes.
What is Id versus od size in copper fittings?
id means inside diameter, od means outside diameter, copper pipe and tubing is measured by the od, therefore the od the pipe or tubing will be the same as the id of the fitting
How can I connect a water line to my fridge?
To connect a water line to your fridge, you will need a water line kit that typically includes a tubing, fittings, and a valve. First, locate the nearest water source and shut off the water supply. Then, connect the tubing to the water supply line using the fittings provided. Next, run the tubing to the back of the fridge and connect it to the water inlet valve. Finally, turn on the water supply and check for any leaks.
How can I efficiently replace a copper pipe with PEX in my plumbing system?
To efficiently replace a copper pipe with PEX in your plumbing system, follow these steps: Turn off the water supply to the area where you will be working. Cut the copper pipe using a pipe cutter. Clean the ends of the copper pipe and PEX tubing. Install the appropriate fittings to connect the PEX tubing to the existing plumbing. Use a crimping tool to secure the connections. Turn the water supply back on and check for leaks. Insulate the PEX tubing if needed.
How do you connect flex pipe to a copper tubing?
You use a compression fitting or something like a Sharkbite.
What is the best way to connect a 1/4 inch copper tubing to a water supply line?
The best way to connect a 1/4 inch copper tubing to a water supply line is by using a compression fitting. This fitting allows for a secure and leak-proof connection between the tubing and the water supply line.
Can you use standard compression fittings or must you use flared fittings when you need to join two lengths of copper tubing for use with a kerosene fueled monitor heater?
I believe it has to be flared as compression is not approved
