A flange spreader is a device that uses a ratchet, leverage and fulcrum points to spread a bolt together connection. Usually welded pipe to flange, then a seal or gasket, and then another flange, and then welded or threaded pipe carries on. A flange spreader is used to spread the flanges apart to change a gasket or put in a spec blind to blank either side of the connection.
There is a conversion matrix on Earthway's site to get the conversion from a Scott's spreader to an Earthway spreader. It is easiest to add 10. For example, Scott's spreader set at 4 should be set at 14 for an Earthway spreader set.
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
the same
The spreader which is dipped in the alcohol is flamed, the fire will burn off on the spreader. It is sterilized now and could be used in the experiment.
What is the Ortho Spreader 5000 for overseeding
Slip-On Flat Face Flange. It means the face of the flange, the surface the physically touches the next flange is flat as opposed to raised (SORF Flange)
Conversion Chart for Scott's Easy Green Spreader.
You don't need to add hydraulics for the spreader (although you would for the plow). There is electrical work to be done for the spreader controls, however.
it is a flange that's it
it's just called a crepe spreader
super-spreader, a person capable of infecting unusually high numbers of contacts