There is a conversion matrix on Earthway's site to get the conversion from a Scott's spreader to an Earthway spreader. It is easiest to add 10. For example, Scott's spreader set at 4 should be set at 14 for an Earthway spreader set.
For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.
Scotts Valley was named after Hiram Scott, a pioneer who settled in the area in the mid-19th century. After his death, the valley was named in his honor.
Use this equation to convert Kelvin to degrees Celsius/Centigrade: [°C] = [K] - 273.15
The recommended setting for ammonium nitrate on a Speedy Green 2000 spreader is typically around 19 to 21. It is always a good idea to refer to the manufacturer's guidelines or consult with a professional to ensure proper application.
Fahrenheit: ___°C*1.8+32 Kelvin: ___°C+273.15
Getting the best for this type of project is highly recommended. Some of the best salt spreaders are: Suncast S S025, Scotts 71030 and Earthway 3100.
To convert from a Scotts spreader to an Ortho spreader, you need to adjust the settings based on the product you're using. First, check the product label for the recommended spreader settings for both brands. Then, use a conversion chart available online or from the product manufacturer to find the corresponding Ortho setting based on your Scotts spreader setting. Finally, adjust your Ortho spreader's dial accordingly before applying the product.
For the Earthway broadcast spreader, you can set it to a setting of around 3.5 to apply Scotts Turf Builder Plus 2 accurately. It's recommended to start at a lower setting and adjust as needed based on the size of the particles in the fertilizer and the coverage you desire. Always refer to the Scotts Turf Builder packaging for specific application instructions.
Spreader settings for Scotts manufactured spreaders are listed on the back of the bag.
The spreader setting for Scotts Southern Turf Builder when using the EZ Broadcast spreader by Republic is 3.5. If you are using the EZ Drop Spreader by Republic the spreader setting is 6.5.
What is the Ortho Spreader 5000 for overseeding
Unfortunately, there is no conversion. The spreaders are calibrated differently.
The Scotts spreader has a dial on there they call a micrometer. The settings on the dial are tested specifically with their products and their spreader. I'm not sure how they compare as I've never seen the Sears spreader. The Scotts Company's consumer services division keeps a list of many spreader types and can often help with setting the spreader before applying their product. You may want to contact them. Look them up at www.scotts.com.
To convert Scotts fertilizer spreader settings to Sears, you can use a conversion chart that typically lists the equivalent settings for different brands. If a chart isn't available, you can start by adjusting the Sears spreader to a similar setting as recommended for Scotts based on the product type. Conduct a test on a small area to observe the distribution and adjust as needed until you achieve the desired coverage. Always refer to the specific product instructions for the best results.
Yes one can use Vigoro spread with a Scotts spreader. The amount of Vigoro spread that needs to be used must be correlated in retrospect with the size of the area needing the spread.
If you are using the Vigoro Ultra Turf Lawn Fertilizer(29-0-4) with the Scotts Standard Broadcast Spreader then the setting would be 5.
If you send an email to Scotts Consumer service they can actually send you the spreader settings you need. You can contact them through their website and they will email your spreader setting. https://www.scotts.com/smg/contactus/contactUs.jsp?navId=page900108&parentId=page900134