0
If you send an email to Scotts Consumer service they can actually send you the spreader settings you need. You can contact them through their website and they will email your spreader setting.
https://www.scotts.com/smg/contactus/contactUs.jsp?navId=page900108&parentId=page900134
What else can I help you with?
Where can one find a money conversion chart?
Oh, dude, you can find a money conversion chart pretty easily online. Just type it into your favorite search engine and boom, there it is. Or you could always check out a financial website or even download an app for that. It's like, everywhere, man.
What is the cost of a transponder for driving on the 407 ETR?
As of 8/15/2011 Monthly Transponder Lease$2.75**Annual Transponder Lease$21.50*** http://www5.407etr.com/tolls/rate-chart-2011.html
Do you have a rate chart for additional oz postage?
In general the answer is yes, but depends on the specific stamp. It can also depend on the particular envelope and cancellation. First day of issue envelopes are good. Historical dates and locations can also be of great value.
What is 91.00 plus tax?
The answer depends on the rate of tax.The answer depends on the rate of tax.The answer depends on the rate of tax.The answer depends on the rate of tax.
How do you do distance rate and time problems?
Generally: RATE = DISTANCE / TIME -or- DISTANCE = RATE * TIME -or- TIME = DISTANCE / RATE qed
What is the K setting on a Scotts R8A spreader converted to on a Scotts Speedy Green spreader?
The K setting on a Scotts R8A spreader corresponds to a specific rate of application for granular materials. For a Scotts Speedy Green spreader, the equivalent setting can vary, but generally, you can use a conversion chart to find the closest match. Typically, the K setting on the R8A might translate to a setting around 4-5 on the Speedy Green, but it's always best to refer to the manufacturer's conversion guide for precise adjustments based on the material being spread.
What is vigoro spreader setting when using scotts turf builder 32-0-4?
For applying Scotts Turf Builder 32-0-4 using a Vigoro spreader, the recommended setting is typically between 3 to 4, depending on your specific model and the application rate desired. It's essential to check the spreader calibration chart that comes with your Vigoro spreader for precise settings. Always conduct a test run on a small area to ensure proper distribution and adjust if necessary.
How do you convert from a scotts spreader to a earthway spreader?
There is a conversion matrix on Earthway's site to get the conversion from a Scott's spreader to an Earthway spreader. It is easiest to add 10. For example, Scott's spreader set at 4 should be set at 14 for an Earthway spreader set.
How do you convert Scott's broadcast spreader setting to a drop spreader setting?
To convert a Scott's broadcast spreader setting to a drop spreader setting, you typically need to consult the manufacturer's conversion chart, as the settings vary based on the product and model. Generally, a broadcast spreader applies material over a wider area, while a drop spreader applies it in a narrower band directly below the spreader. A common rule of thumb is to start with a drop spreader setting that is about half of the broadcast setting, but it’s important to calibrate based on the specific material being used and the desired application rate. Always test on a small area first to ensure even coverage.
What setting is used on a Scotts Deluxe spreader to broadcast white clover if the rate is quarter pound per 1000 square feet?
1
What would be the setting for a ez drop spreader by republic at a rate of 3.4 lbs per 1000 sq ft?
The setting for a EZ Drop Spreader by Republic at a rate of 3.4 lbs per 1,000 sq ft would typically be found in the spreader's manual or on the calibration chart. Generally, for this rate, you might expect to set the spreader at a medium to high setting, depending on the specific model and the type of material being spread. It's important to conduct a test run to ensure even distribution and adjust the setting as needed for optimal results. Always check the manufacturer's guidelines for the most accurate settings.
What setting should you put 13-13-13 fertilizer on a scotts rotary spreader?
To apply 13-13-13 fertilizer using a Scotts rotary spreader, set the spreader to a setting between 3 and 4, depending on the specific model of the spreader and the application rate recommended on the fertilizer package. It's important to adjust based on the size of your lawn and the desired coverage. Always perform a test run in a small area first to ensure even distribution and avoid over-fertilization.
What is the setting for Scotts spreader for Lesco products?
The setting for a Scotts spreader for Lesco products can vary depending on the specific type of Lesco fertilizer or product being used. Generally, it's recommended to consult the product label for the appropriate settings, as they provide guidance tailored to the specific granule size and application rate. A common starting point is to set the spreader to a medium setting and adjust based on desired coverage and results. Always calibrate the spreader before application to ensure accurate distribution.
What are the setting for ortho drop spreader?
The settings for an ortho drop spreader typically depend on the type of material being applied, such as fertilizer, seed, or herbicide. Generally, you can adjust the flow rate by turning the dial or lever on the spreader to the recommended setting indicated on the product label. It's important to calibrate the spreader according to the manufacturer's guidelines for even distribution and to avoid over-application. Always check the specific instructions for the material you're using for the best results.
What is the setting for Scott drop spreader PF3?
The Scott drop spreader PF3 is designed for residential lawn care, ideal for applying fertilizers, seeds, and other granular products. Its setting typically involves adjusting the spreader to the appropriate setting based on the type of material being used and the desired application rate. The spreader is suitable for various lawn sizes and is built for ease of use on flat terrains. Always refer to the specific product guidelines for optimal settings.
What are the settings for a scotts speedy green 2000 for mk minerals pelletized gypsum?
For applying MK Minerals pelletized gypsum with a Scotts Speedy Green 2000 spreader, you typically want to set the spreader to a medium setting, usually around 10-12 for even distribution. However, it's best to consult the specific product label for MK Minerals gypsum for any recommended settings. Additionally, check your spreader calibration and adjust the rate based on your lawn size and application requirements for optimal results. Always perform a small test area first to ensure proper coverage.
What is the setting on Scott's speedy green 2000 spreader for fertilizer at 5 lbs per 1000 sq ft?
To set Scott's speedy green 2000 spreader for applying fertilizer at a rate of 5 lbs per 1,000 sq ft, refer to the spreader's calibration chart, which typically indicates the appropriate setting for different fertilizers. Generally, for a rate of 5 lbs per 1,000 sq ft, you might use a setting around 4 or 5 on the spreader, but it's essential to check the specific product instructions or the manual for exact recommendations. Always calibrate the spreader beforehand to ensure accurate application.
