0
What else can I help you with?
Do you need to nogging joints when using 15mm plasterboard on 600mm centres rafters?
Yes, you should nog the joints when using 15mm plasterboard on 600mm centers for rafters. Noggings help provide additional support, prevent sagging, and ensure a more stable surface for the plasterboard. They also help to align the joints and improve the overall finish of the plasterboard installation.
What is the equvalent size of 15mm copper pipe to ppr pipe?
20mm
What type of wire should you use as a probe in invisible broken wire detector?
Thick copper cable-15mm
How to Replace a section of copper plumbing pipe?
Assuming it is 15mm. Buy 2 15mm couplers (compression, push fit, pre-soldered or end feed) and a length of 15mm copper pipe. Chop the copper pipe that needs replacing and connect as necessary. If you need any more help just ask.Ans 2 - If you're not familiar working with copper pipe, then it's much easier to get a length of PEX and two 'Sharkbite' or similar push fittings. This generally gives you more flexibilty and allows coverage over areas of the copper pipe that look faulty ( greenish spots) This will cost about the same but is an easier and more reliable repair for the amateur.
What is 15MM?
15mm beads is =- to how many gm?
How many kilometers in 15mm?
15mm = 0.000015km
How much is 15MM?
15mm (millimeters) is about 0.6 inch.
What is the circumference of 15mm?
If you mean that 15mm is the diameter, then the circumference will be 47.1mm
What is the purpose of a 15mm to 12mm thru axle adapter and how does it work?
A 15mm to 12mm thru axle adapter is used to allow a bike wheel with a 15mm thru axle to fit into a fork or frame designed for a 12mm thru axle. The adapter essentially reduces the diameter of the axle to make it compatible with the smaller opening. It works by inserting the adapter into the fork or frame, then inserting the 15mm thru axle through the adapter to secure the wheel in place.
What is 15 mm to m?
15mm=1.5cm. 1.5cm=0.015m So, 15mm = 0.015m
What is the factor of 15mm?
3 x 5 x m x m = 15mm
What percentage is 15mm of 1cm?
% rate = 15mm/10mm * 100% = 150%
