answersLogoWhite

0

What else can I help you with?

Related Questions

How do you wire cooling fan with a manual switch 1995 Pontiac trans am?

get a pice of wire set it to the cooling relay switch run it under the hood to the door get a switch from auto zone connect it and your done


How can I install a light switch that does not require a neutral wire?

To install a light switch that does not require a neutral wire, you can use a switch that is designed to work without one, such as a wireless or battery-powered switch. These switches use alternative methods to power the switch and control the light without needing a neutral wire. Simply follow the manufacturer's instructions for installation to set up the switch without the need for a neutral wire.


How do you troubleshoot the back up light switch 94 Camry?

Put a jumper wire across the terminals on the switch if the lights work (with ignition switch set to "on" position) switch is defective


Two settings of a dip switch?

To set a dip switch, you can flip the switch either up or down. For example, setting a dip switch to "on" would mean flipping it to the up position, while setting it to "off" would be in the down position.


Can you run two sets of 3 way switches with one 14-3 wire?

No. For any 3 way switch installation you need 2 "travelers" between switches and these conductors cannot be used for any other purpose. The 3rd wire is used for a neutral or switch leg, depending on the needs of the circuit, but is not connected to both switches. The neutral is not connected to either switch.


How can I set up a timer switch for my exhaust fan to automatically control its operation?

To set up a timer switch for your exhaust fan, you will need to connect the timer switch to the power source and then wire it to the exhaust fan. Set the timer according to your desired schedule for the fan to turn on and off automatically.


How long do aa duracell batteries last in a flashlight?

No set answer to that, it depends on the power consumption of what they're connected to.


What 70's party song playing at the beginning of set it off?

flashlight by parliament flashlight by parliament


What song played after flashlight in movie set it off?

The song that played after "Flashlight" in the movie "Set It Off" is "Don't Let Go (Love)" by En Vogue.


How do you re-set LP ac switch for compressor to start?

easy first by pass it with a wire link next fix leak and recharge with r134a 800grms at suction pressure of 200kpa remove wire link and re connect on to Lp switch


What is RS flip flop?

The "RS" in RS flip flop stands for "Reset-Set". The RS flip flop has a Reset and a Set input. You can reset or set the flip flop as desired. Output state will be held based on whichever input was last asserted.


Full form of s-r flip flop?

set reset flip flop